Add Support Weld dialog box - Intergraph Spoolgen - Help

Intergraph Spoolgen Help

Language
English
Product
Intergraph Spoolgen
Search by Category
Help
SmartPlant Foundation / SDx Version
10
I-Configure Version
6.0(2016)
Isogen Version
13.0(2016)
Smart Isometrics Version
7.2
Spoolgen Version
9.2

Weld description

Select a type of support weld.

Category

Select the category. You can choose Fabrication, Erection, or Offshore.

Weld type

Displays the SKEY of the weld

Weld schedule

Type the thickness of the weld.

N.S

Type the diameter of the support weld. The N.S. option is available only if you have selected one of the trunnion welds in the Weld description list. For all other types of support welds, the N.S. option is read-only.

Angle

Type the angle at which to place the trunnion to the support. Usually, trunnions are placed perpendicular to the support (90-degrees). The Angle option is only available if you select one of the trunnion weld in the Weld description list.

Add end plate weld(s)

Specifies whether an end plate weld is added to the support weld. Leave this option blank if no end plate welds are required. The Add end plate weld(s) option is only available if you select one of the trunnion weld in the Weld Description list.