Isometric style
Select the isometric style the software will use to generate the drawing. The style determines the Isogen settings, controls and drawing sheets that produce the isometric drawing in a particular format. Only those styles that are available in the connected project display in the list.
Output units
Select the dimensional units displayed in the isometric drawing. By default, Isogen creates the drawing with the same dimensional units used in the sketch. However, you can select (on-the-fly) alternative output units. The output units you select only affect the output drawing; they do not change the Spoolgen project setting.
North arrow
Select the orientation of the North arrow in the isometric drawing. By default, Isogen creates a drawing with the same North arrow orientation used in the sketch. However, you can select (on-the-fly) an alternative orientation: TOP LEFT, TOP RIGHT, BOTTOM LEFT, or BOTTOM RIGHT. The view point you select only affects the output drawing. It does not change the Spoolgen project setting.
Project Symbols
Generates the isometric drawing using any custom symbols that have been redefined in Symbol Editor. See Custom Symbols for Isometric Drawings.
Project Symbols is available only when working with SpoolgenDB projects in Spoolgen.
OK
Begins the drawing generation process. Depending on the status of the pipeline, the isometric drawing generation process progresses according to the table below.
Pipeline status |
Drawing Generation Steps Performed |
Checked In/Pending |
The pipeline is checked out from the project database. The drawing is generated. The pipeline is checked back in to the project database. All deliverables are uploaded to the project database. |
Checked Out |
The drawing is generated directly on the pipeline in the Work folder. The pipeline is checked in to the project database. The minor version is incremented. All deliverables are uploaded to the project database. |
Cancel
Closes the dialog box without performing drawing generation.