Turn on interactive spooling - Intergraph Spoolgen - Help

Show Me

1. Click Start > All Programs > Intergraph Spoolgen > Tools > I-Configure.

   I-Configure opens.

2. Select the current Spoolgen project in the Project View panel.

3. Click Project Defaults on the horizontal toolbar.

   The Project Defaults dialog box opens.

4. Set Interactive Spooling to On.

5. Click OK to save the changes, and close the dialog box.

• When Interactive Spooling is set to On, the software observes the standards listed below.

  • SGImport settings of the properties listed below are used to control interactive spooling behavior:

    • Spools > Settings > Allocation

    • Spools > Settings > Break at Unions

    • Spools > Settings > Site Welds are not assigned to Spools

  • For any isometric drawing style selected for drawing generation, the following standards apply:

    • Spools > Settings > Type is set to None

    • Spools > Settings > Allocation is set to User

• When Interactive Spooling is set to Off, Spools > Settings > Type and Spools > Settings > Allocation use the values currently defined for the selected isometric drawing style.