Configure the Smart Weld Quality Management System site - Intergraph Smart WQMS - 2019 R1 (5.0) - Installation - Hexagon PPM

Intergraph Smart Weld Quality Management System Installation (2019 R1)

Intergraph Smart WQMS
Installation & Upgrade
2019 R1 (5.0)

To configure and upgrade Weld Quality Management System site:

  1. From the Start menu, click SPF Site Configuration tool for Smart WQMS.

  2. In Select Site list, select the site that you created earlier.

  3. If you are using secure site, select Secure Channel (SSL) check box and enter the Web Host.

  4. Enter the User Name and Password.

    By default, type the user name as superuser and leave the Password field empty.

  5. Select Include Default Configuration to install the default configuration for the new site.

  6. Select one of the following processes:

    • Installation - An installation project

    • Fabrication - An inspections project with Notice of Inspections and Report of inspections

  7. Click Configure SPF Site to proceed and click OK after the configuration is complete.

Log into Smart Weld Quality Management System

After creating and configuring the Weld Quality Management System site, you can login to Weld Quality Management System Site User interface.

To login to Weld Quality Management System:

  1. From the start menu, click Smart WQMS.

  2. Enter the Username as Password.

  3. In the Server list, make sure you select the site name you created previously.

  4. Click Log In.

  5. Click Administration. The Administration sub-modules appear.