In this module, you can add, view, and update welding procedures for the selected welding process.
-
Click Welding Procedure.
-
Click Add Item .
-
Enter the following information:
-
Procedure ID - Specifies a unique ID for the welding procedure.
-
Discipline - Specifies the discipline of the welding procedure. Select a discipline from the menu list.
-
Weld Process 1 - Specifies the welding procedure. Select a weld process from the menu list.
-
P" Number 1 - Specifies the P number. Select a P number from the menu list.
-
F" Number 1 - Specifies the F number. Select a F number from the menu list.
-
Number 1 Max Thickness - Specifies the maximum thickness for the weld.
-
Vertical Welding 1 (up, down, both) - Specifies the vertical welding.
-
Backing 1 (with/without) - Specifies the backing.
-
Backing Material 1 - Specifies the backing material.
-
Shielding Gas 1 - Specifies the shielding gas.
-
Shielding Gas Composition 1 - Specifies the shielding gas composition.
-
Insert Gas Backing 1 - Specifies the type of inert gas backing required.
-
Insert 1 (Yes/No) - Specifies whether inert gas backing is required.
-
Product Form 1 (solid/flux/metal cored) - Specifies the product form.
-
Joint Position 1 - Specifies the joint 1 position.
-
Current Polarity 1 for GTAW - Specifies the polarity for GTAW welding.
-
-
Click Save.