In this module, you can add or edit the data related to the welds joints.
-
Click Add/Edit Joint.
-
In the search bar, enter *, select any filter criteria, and click Refresh .
The software displays all the ISO/Drawing Numbers that satisfy the filter criteria.
If you want particular drawing numbers to be displayed in the ISO/Drawing No list:
-
Copy the ISO/Drawing numbers from the Excel sheet and paste them in the Search bar. After you paste the drawing numbers in the Search bar, they are separated with the | symbol.
For example, If you copy two drawing numbers from the Excel sheet and paste them in the Search bar, the drawing numbers appear as as HXN81X-S91011-IS030015|HXN81X-S91011-IS030016 separated with the | symbol.
-
In the Search bar, type the ISO/Drawing number in the format below:
*last two digits of the drawing number* or *Drawing number pattern*
For example, if the drawing number is HXN81X-S91011-IS030015, in the Search bar, type *15* or type *S91011*. Then only the drawing numbers related to the pattern will be displayed in the ISO/Drawing No list.
This is applicable to all the modules of Weld Quality Management System where ever there is a filter criteria for ISO/Drawing numbers.
-
-
Select an ISO from the list, and all the welds on that ISO are displayed in the table.
-
Click Add Item .
The software adds an empty row to the table.
-
Enter the following properties and click Save.
-
Weld Type
-
Weld Size
-
Weld Status
-
Reason
-
-
If you want to delete a weld, click Delete with Status Update .
This changes the weld status of the selected weld to Deleted, and that row is disabled for editing.
-
If you want load the data from an excel file, click Bulk Load .
-
Select the required file and click Open.