Set Stereo Distances - Intergraph Smart Review - Help

Intergraph Smart Review Help

Language
English
Product
Intergraph Smart Review
Search by Category
Help
SmartPlant Foundation / SDx Version
10
Smart Review Version
2020 (15.0)

View > Settings > View > Advanced > Stereo > Distances

To use this functionality, you must install the Photo-Realism module.

Displays the Stereo Distances dialog box, which allows you to adjust the stereo distances to create realistic depth perception.

  1. View a model in Stereo mode while wearing the interlaced glasses.

  2. Click View > Settings > View > Advanced > Stereo > Distances.

    Stereo Distances Dialog Box

  3. Click Pick Focal Point.

  4. Click an object in the Main view that is approximately halfway between the eye point and the backmost object displayed.

  5. Click again to accept the object.

  6. Click Apply.

  7. Edit the default Between Eyes value to equal the approximate distance between your eyes. Typically, this value is about 2.2 inches or 5.6 centimeters. A larger value exaggerates the effect, while a smaller value reduces the effect. An accurate value produces realistic depth perception.

  8. Click Apply.

  9. Adjust the Between Eyes value as needed to achieve the most realistic depth perception.

  10. When you finish adjusting stereo effects, click OK.

To use this functionality, you must install the Photo-Realism module.

  • After setting the Focal Distance, elements behind the focal point appear to recede into the distance, while elements in front of the focal point appear to be in front of the monitor. The Focal Distance field displays the location of the selected object.

  • Screen updates take slightly longer than normal because SmartPlant Review is actually drawing two images on screen.

See Also

Activate Stereo
Set Stereo Settings
Stereo Distances Dialog Box