-
Click Integration > XI10 SPIso > XI1030 Export > XI103010 Export Job Default Sets.
-
In the upper grid, click Edit Grid .
-
Click Add Row .
-
In the Default Set box, type a name for this set.
-
Specify the other columns for this set, as needed.
-
Click Save Grid .
-
Click Read-Only Grid .
-
Select the row you just added in the upper grid.
-
In the lower grid, click Edit Grid , and add or modify details, as needed.
-
Click Save Grid .
-
Click Read-Only Grid .
-
All delivered details of the delivered standard set must be available in every new set. The values are mandatory and must be filled.
-
When you create a new export job default set, the software automatically creates the standard default details. The new details are visible after you save the set, leave the Edit Grid mode, and select the new record.
The delivered export job defaults are listed in the following table.
Name |
Description |
---|---|
BOLTCODELENGTH |
Length of the bolt commodity code. |
BOLTDIAMETERUNITS |
Unit for the bolt diameter (mm or in). |
BOREUNITS |
Unit for the bore (mm or in). |
CONFIGURATIONMAP.XML |
Path to configurationmap.xml, which is delivered with SmartPlant Isometrics and is stored in the C:\Program Files\Common Files\Alias folder, by default. |
DEFAULT SUPPORTS |
If set to TRUE, the software creates default supports automatically (TRUE or FALSE). |
LENGTHUNITS |
Unit for the length (mm or in). |
MAXBORES |
Number of maximum bores. |
MDB EXPORT PATH |
Path where the SmartPlant Isometrics Access database is created (default is C:\). |
MINTUBE |
Number of minimum tube lengths. |
PULLEDBEND |
Pulled bend (TRUE or FALSE). |
STANDARD |
Information only (like ANSI or DIN). |
SYSTEMMATERIALMANAGER.XML |
Path to systemmaterialmanager.xml, which is delivered with SmartPlant Isometrics and is stored in the C:\Program Files\Common Files\Alias\Data folder, by default. |
USE OPTIONAL CODE |
If set to TRUE, use the commodity code instead of the ident code for bolt processing in SmartPlant Isometrics (TRUE or FALSE). This setting is not inserted automatically when creating a new default set. |
WEIGHTUNITS |
Unit for the weight. |