Implied Items Criteria Details Grid - Intergraph Smart Reference Data - Help - Hexagon

Intergraph Smart Reference Data Help (10.2)

Language
English
Product
Intergraph Smart Reference Data
Search by Category
Help
Smart Materials/Smart Reference Data Version
10.2

This grid allows you to insert, modify, and delete the details for choosing the corresponding spec items and corresponding implied items for Smart 3D.

From 1, To 1, From 2, To 2 - The Selection list LOV for these fields shows all the nominal sizes available for the Spec Standard Nominal Size table. Values other than the ones shown in the Selection list cannot be specified.

In the case where no Spec Standard Nominal Size table is available, any numeric data is allowed.

The initial value in these fields is ‘MATCH’, which means it takes the same value as the triggering items.

This description is also applicable to the Implied Item Size 1 and 2 fields.

Quantity - This field represents the quantity. Any numeric value can be entered in this field.

Unit - The Selection list LOV for this field shows the units. Values other than the ones shown in the Selection list are not allowed. The default unit is taken against the nominal size (refer to S.10.01) corresponding to which there is a standard that is marked as default.

If a standard is marked as default in both the project and product group, the one from the project will have the preference.

Fabcat - This field represents the fabrication category. Any numeric value can be entered in this field.