-
Click Remnant .
-
Click TrueShape on the Type menu.
The software attaches the scrap areas between the parts to the remnant using the default settings, as shown below.
-
(Optional) Increase the Offset Distance to decrease the scrap areas. The offset is increased by 8mm In the example nesting below:
-
(Optional) Select Scrap Cut under Geometry Tools, and then insert scrap cutting lines to define the shape of the remnant using the procedure below:
-
(Optional) Select Create Cutter Path to add the scrap cutting lines to the NC-program.
-
Click a start point and an end point to insert a scrap cutting line. The lines can overlap the parts.
-
-
Click Confirm to accept the shape..