Type and Name (New Satellite Slot Wizard) - Intergraph Smart P&ID - Configuration - Intergraph

Intergraph Smart P&ID Workshare Configuration and Reference (2019)

Language
English
Product
Intergraph Smart P&ID
Search by Category
Administration & Configuration
Smart Electrical Version
2019 (9.0)
Smart P&ID Version
9 (2019)
Smart Engineering Manager Version
10 (2019)

Allows you to define the unique name and password for the satellite slot. The password is used as a key of sorts so that only the correct remote site can connect to the satellite slot at the master plant structure. An asterisk (*) means a value is required for that box.

Workshare satellite type — Select the type of Workshare collaboration for this new satellite slot:

  • Connected — Specifies that this satellite slot will use a database link and will collaborate through an Oracle database.

  • Standalone — Specifies that this satellite slot will not collaborate through a database. This type of Workshare collaboration allows the host and satellite to use different databases locally.

Workshare name — Use the default name provided or type a name for this satellite slot. This name is used as the name of the slot in the Satellites node and must be unique per satellite slot. Names cannot contain any of the following characters: ~ ` ! % ^ & * ( ) - + = { } [ ] \ / ; : ‘ " < > , . ? |

Workshare password — Type a password for the satellite slot. The password is case-sensitive. This password will be needed by the user at the remote site who will be connecting to this satellite slot, and can be changed later if desired.

Confirm password — Re-type the password.

 Be sure to make a note of this password because there is no way to retrieve it if you forget it. You must delete and re-create the satellite slot if you forget the password that you set here.

See Also

Change Password Command (Workshare Menu)