Draw Toolbar - Intergraph Smart P&ID - 11 - Help - Intergraph

Intergraph Smart P&ID Help

Language
English
Product
Intergraph Smart P&ID
Search by Category
Help
Smart P&ID Version
11
Smart Engineering Manager Version
12
SmartSketch Version
11

The Draw toolbar displays by default docked to the left side of the interface. You can use the commands on this toolbar to place the basic elements of your symbol.

Some commands on the Draw toolbar display fly-outs when you select and hold the command button. Fly-outs access commands that vary from but are closely associated with the original command that is displayed.

A command button that has a small black arrow in the lower right corner of the button will display a fly-out. The following illustration shows the fly-outs that display when you select and hold the Circle by Center Point command button:

Select Select Tool

Use to select, modify, and manipulate elements.

Line Line/Arc Continuous Command

Draws one line or a series of connected lines.

Tangent Arc Tangent Arc Command.

Draws an arc tangent or perpendicular to one or two elements.

Arc by 3 Points Arc by 3 Points Command.

Draws an arc using three points.

Arc By Center Point Arc by Center Point Command

Draws an arc using three points.

Curve Curve Command

Draws a smooth, open or closed curve.

FreeForm FreeForm Command

Draws freeform curves or splines..

FreeSketch FreeSketch Command

Draws lines, arcs, rectangles, and circles by converting a sketch into a precision drawing.

Circle by Center Point Circle by Center Point Command

Draws a circle using a center point and radius.

Circle by 3 Points Circle by 3 Points Command.

Draws a circle using three points that define the circumference.

Tangent Circle Tangent Circle Command

Draws a circle tangent to one or two elements.

Ellipse By Center Ellipse by Center Point Command

Draws an ellipse using the center point and two edge points.

Ellipse By 3 Points Ellipse by 3 Points Command

Draws an ellipse using three edge points.

Rectangle Command

Draws a rectangle using three points. For more information, see .

Revision Cloud Revision Cloud Command

Places a cloud around objects in a drawing.

Point Point Command

Draws a point.

Text Box Text Box Command

Places a text box in a document.

Fillet Fillet Command

Draws a fillet between two elements.

Chamfer Chamfer Command

Draws a chamfer, or bevel.

Trim Trim Command

Trims open and closed elements to the closest intersection in both directions.

Trim Corner Trim Corner Command

Draws a corner by extending or trimming two selected open elements.

Extend to Next Extend to Next Command

Extends one or more open elements until they intersect with the nearest element.

Fill Fill Command

Places a solid color or pattern inside a closed boundary.