Modify Project Status in Smart P&ID - Intergraph Smart P&ID - 11 - Help - Intergraph

Intergraph Smart P&ID Help

Language
English
Product
Intergraph Smart P&ID
Search by Category
Help
Smart P&ID Version
11
Smart Engineering Manager Version
12
SmartSketch Version
11
  1. In Drawing Manager, open the project for which you want to view the status.

  2. Select Project > Project Status.

  3. In the Smart P&ID project status area, ascertain the current status of your project with respect to the plant.

    A check mark denotes the current status. Possible statuses include Active, Completed, Merged, and Canceled.

  4. Do any of the following to change the status of your project:

    • To change an active project to completed, select Complete Project. This command is available only when the initial project status is Active.

    SHARED Tip When you change the project status to Completed, all the drawings in the project are verified for checking into the plant. You can verify each drawing separately if you want to. See Verify a Drawing for Checkin.

    • To change a completed project back to active, select Return to Active. This command is available only when the initial project status is Completed.

    • To merge a completed project into the plant, select Merge Project. This command is available only when the initial project status is Completed.

    • To cancel an active project, select Cancel Project.

  • If the plant is registered, select Refresh Status on the Project Status dialog to update the SmartPlant project status display.

  • In SmartPlant Foundation, the Complete Project, Return to Active, and Merge Project options are not available unless the SmartPlant project status is also Active. The Cancel Project option is not available unless the SmartPlant project status is also Canceled.