Undo Command (Edit Menu) - Intergraph Smart P&ID - 10 - Help - Intergraph

Intergraph Smart P&ID Help

Language
English
Product
Intergraph Smart P&ID
Search by Category
Help
Smart P&ID Version
10
Smart Engineering Manager Version
11
SmartSketch Version
10.0(2018)

PPM All Outputs Graphic Rejects the last action that you completed.

Up to ten operations are saved in the undo list, and you can undo them by repeated use of the Undo command. The undo list is cleared if you perform any of the following actions:

  • Change the properties of the Drawing view on the View Properties dialog

  • Turn the display of inconsistency indicators off or on by selecting View > Show Inconsistencies

  • Select File > Save

  • Open a different drawing or toggle to another open drawing

  • Open a new Drawing view or new Engineering Data Editor

  • Perform Plant Editing

  • Move a connector to another drawing stockpile by using commands in the Engineering Data Editor or on the Connector shortcut menu

  • Change or view the claim status of drawing objects

  • Enter Auxiliary Graphics mode

An action that can be undone is defined in several ways. Running a command is usually an action. Modifying item properties is an action that ends when another item is selected. This definition of an action holds true for select sets, too, and for multiple items selected in the Engineering Data Editor. That is, modifying the properties of a select set is one action in and of itself, not one action for each member of the set.

  • If you are placing items in a Typical view, the Undo command will undo placement of all Typicals placed in the last operation, not just the last Typical record placed, and will return the user to the Primary view.

  • The Undo command does not reverse view manipulations. However, the View > Previous command is still available for that purpose.