Display
Displays the attributes and their corresponding values for the selected Design Elements in the Design Hierarchy Explorer.
Correlation
Defines the correlation criteria. See Defining the Correlation Criteria.
Attribute
Defines the criteria for attribute comparison. For more information, see Defining the Criteria for Attribute Comparison.
Topology
Defines the criteria for topology comparison. For more information, see Defining the Criteria for Topology Comparison.
Alternate Topology
Defines the topology criteria for a specific Piping Component Type. When you click this tab, the software displays Smart P&ID Design Validation dialog box to specify the attributes.
Attribute Exclusion
Defines the criteria to exclude attribute values from a selected design element. When you select the design element, the software displays Smart P&ID Design Validation dialog box to specify the attribute value to be excluded.
In the following example, the NPD attribute value of a design element has been excluded and the result is as shown in the graphic.
Colors
Defines the color codes for data inconsistencies. You can also define the color codes in the Smart P&ID Design Validation.ini file.
|
Type of inconsistency |
Default color |
|
|
Correlation inconsistency |
|
|
|
Attribute inconsistency |
|
|
|
Topology inconsistency |
|
|
|
Approved inconsistency with correction |
|
|
|
Approved inconsistency without correction |
|
|
|
Unapproved inconsistency |
|
OK
Applies the changes, and exits the dialog box.
Apply
Applies the changes.
Cancel
Does not apply the changes.
Open
Opens the Smart P&ID Design Validation.ini file. Use this command to update the settings through Smart P&ID Design Validation.ini file.
Save
Saves the updates made to Smart P&ID Design Validation.ini file.