Create a DataWedge profile on Zebra TC75 - Intergraph Smart Materials - 5.1 - Help - Hexagon

Intergraph Smart Materials MobileScan Help (5.1)

Language
English
Product
Intergraph Smart Materials
Subproduct
MobileScan
Search by Category
Help
Smart Materials Mobile Scan Version
5.1

Zebra TC75 uses DataWedge mobile application for bar code scanning capabilities. The DataWedge application runs in the background. The application does the following:

  • Captures the information from a scan.

  • Converts the captured information to keystrokes.

  • Transmits the formatted information to the MobileScan application.

DataWedge uses its own default profile for scanning but also allows the users to create profiles based on the user requirements. The default profile concatenates information from multiple lines of a QR code into a single string. Some of the features in MobileScan require specific information from the QR code and this requires a new profile that captures and provides feature specific information to MobileScan.

  1. Start the DataWedge application.

  2. Tap DataWedge - Hamburger Menu Icon and select New Profile and type profile name. For example, MobileScan.

  3. Tap the newly created MobileScan profile.

  4. Select Associated apps.

  5. Tap DataWedge - Hamburger Menu Icon, New app/activity and select com.hexagon.ms from Select application.

  6. In Select activity page select *.

  7. Navigate back to the Profile: MobileScan page.

  8. In Keystroke output, tap Advanced data formatting and select Enable.

  9. Tap and hold Rule0 and select Delete rule.

  10. Tap DataWedge - Hamburger Menu Icon and select New rule.

  11. Type a rule name. For example, MSRule.

  12. Tap MSRule.

    Rule: MSRule page displays.

  13. Tap Criteria > Source criteria > Barcode input and select All decoders enabled.

  14. Navigate back to the Rule: MSRule page and tap Actions.

    The Actions: MSRule page displays.

  15. Long press and delete all the listed actions.

  16. Tap DataWedge - Hamburger Menu Icon and select New action.

  17. In the New action page, select Replace string.

  18. Tap Replace string > Find string > tap the enter key, and then tap OK.

  19. Tap Replace string > Replace string > tap the space bar, and then tap OK.

  20. Navigate back to the Actions: MSRule.

  21. Tap DataWedge - Hamburger Menu Icon and select New action.

  22. In the New action page, select Send remaining.

  23. Tap DataWedge - Hamburger Menu Icon and select New action.

  24. In the New action page, select Send String.

  25. Tap Send string > String > tap the enter key, and then tap OK.

    The profile is enabled and ready to use.