To enable Smart Materials to find Ident keys from Smart 3D, you must import the part numbers, spec code, commodity code, and sizes.
Smart Materials finds the ident from Smart 3D using its part number. When you load Smart 3D’s material take off (MTO) data, Smart Materials finds the ident, which is linked to company ident. Because bolt and gasket do not use part number, Smart Materials finds the ident from the spec code, commodity code, and sizes.
Part Number Generation Setup
Create Company
Create new company to store the Smart 3D part number on the A.10.23 Companies screen.
Assign the company type on the A.10.24 Company Types screen.
Define Project Default
In the A 20.12 Project Defaults screen, assign the company_id to project default ZI_SP3D_CO.
Prepare Spec Item and Export
Create Spec Item Idents
Create the Spec Item using the table information below on the S.50.06 Specification Management Windows 2 screen.
|
Short Code |
Commodity Code |
Option Code |
Size Range |
|---|---|---|---|
|
P-PIPE |
PPP70ABA74LG |
1 |
2 – 10 |
|
FLGWN |
PFWN51FA11AD |
1 |
2 – 10 |
|
FLGWN |
PFWN51FA11AD |
172 |
2 – 10 |
|
TRN-90 |
PWE95B0LF600 |
1 |
2 – 10 |
|
BR-PAD |
PWRP0A5G00 |
1 |
2 – 10 |
|
GSKT-RJ |
PGRJC3VBDJ00 |
1 |
2 – 10 |
|
BLTNG |
PTM00A381A |
1 |
0.5 – 0.75 |
The Spec Item Ident is complete.
In this spec, Flange has the same two spec items – the same commodity code, size range, but different schedule.
Export the Smart 3D Catalog
Export Smart 3D catalog data on the SP3D 20.01 Export Jobs screen.
On the Selected Sheets tab, the target sheets are 90DegElbow, PipeStock, ReinforcingPad, and WeldneckFlange.
The export is complete.
The exported catalog workbook consist of the following sheets:
90DegElbow
PipeStock
ReinforcingPad
WeldNeckFlange.
Confirm the Part Number
After catalog data is exported, the Company Ident Codes are generated as part numbers for the components.
This is done for Pipe Part Numbers (as shown below), Flange Part Numbers, and Reinforcing Pad Part Numbers.
