Purpose
This section explains how to filter specification items to get the required idents.
Exercise
-
Open the S.50.06 Specification Items screen from Smart Reference Data > S.50 Specification. The screen usually opens in enter query mode, and all fields are empty and are displayed with a yellow background. If not, click the Enter Query
button to change to query mode.
-
Enter the previously created specification code (TRAIN_1CS150) in the Spec Code field or open the LOV using the List of Values
button and select the spec code from the list. Then click OK to close the LOV.
-
Click the Run Query
button to display the selected specification with its details.
-
Double-click on the Spec Code field to open Window 2 of S.50.06.
-
Click the Next Block
button to open Window 3.
The result should look like the picture above. Five idents should be displayed with NPS from .5 to 2 and schedule of S-XS. If the result is not ok, continue with the following steps.
-
Check the Geom1 field on the spec item in Window 2; this field must be empty.
-
Check the assigned geometric on the Spec Header Geometric tab in Window 1. The Filter indicator must be checked. Verify that the correct geometric table and from-to sizes were saved.
-
Go back to Window 2 and select the spec item. Then open the S.80.01 Ident Management screen using the Fastcall in the upper right corner.
The S.80.01 screen will automatically open with the commodity code of the spec item queried.
-
Check if the idents are available on the Existing Idents tab of S.80.01. Restrict the displayed idents by clicking the Enter Query
button, entering S-XS in the Sch1 field, and clicking the Run Query button to display all idents with a schedule of S-XS.
If the idents are not available, they must be built using the
on the Only new Idents tab.
-
Close the screens by selecting File > Close All from the main menu.
