Where Conditions for Disposition Rules - Intergraph Smart Materials - Version 2020 (10.0) - Help - Hexagon PPM

Intergraph Smart Materials Classic Help (2020)

Language
English
Product
Intergraph Smart Materials
Subproduct
Classic
Search by Category
Help
Smart Materials/Smart Reference Data Version
2020 (10.0)

To calculate contingencies during the MTO job, you must define where conditions that are used to identify the material for which the calculation should apply. Define a where condition for each disposition rule you want to use.

  1. Open the A.60.06 Where Conditions screen.

    SHARED Tip You can call this screen by double-clicking in Where Condition on R.10.23.

  2. Type the Where condition name in the Name box.

  3. Select Rule based from the Kind of list.

  4. Type the Where condition description in the Short Desc and Description boxes.

  5. Select R1023 from the select list in the Module box.

  6. TIP: This value is pre-filled if you opened this screen from R.10.23.

  7. Click Save.

  8. On the Attributes tab, select the attributes for commodity group and part, and assign the corresponding plate group and part.

  9. Click Save.