Export pipeline data - Intergraph Smart Isometrics - Help - Hexagon PPM

Intergraph Smart Isometrics Help

Language
English
Product
Intergraph Smart Isometrics
Search by Category
Help
SmartPlant Foundation / SDx Version
10
I-Configure Version
6.0(2016)
Isogen Version
13.0(2016)
Smart Isometrics Version
2019 R1 (7.1)
Spoolgen Version
2019 R1 (9.1)

The transfer of as-built data between Smart Isometrics and the 3D design model is a multi-step operation, as illustrated in the following diagram.

  1. Open I-Configure.

  2. Select the current isometric project in the Project View panel, and then click Project Defaults on the horizontal toolbar. Alternatively, select the project, and then click Edit > Project Defaults.

    The <Project Name> Project Defaults dialog box displays.

  3. Locate XMpLant Mapping File in the list of project defaults on the Project Defaults tab.

  4. Click in the Value box for XMpLant Mapping File, and then click Browse Arrow.

    The Specify File dialog box displays.

  5. Navigate to the .xml mapping file, and then click Open.

    When you install the software, the file POD_XM_SP3D_MappingFile.xml is delivered to C:\SampleIsoDir\SPITutorial\Data\Processing by default. Unless you specify otherwise, the software uses this file when it exports piping data to the Smart 3D-supported XML format.

  6. Click OK to close the dialog box, and then click File > Exit to exit I-Configure.

  7. Open Smart Isometrics, and create the isometric. The completed isometric must be fully defined and able to be generated by Isogen. For more information, see Dimension the Pipeline and Validate the Pipeline Design.

  8. Click File > Export > XMpLant.

    The Export to XMpLant dialog box displays.

  9. Specify the names and full path locations of the .xml file to be created, the mapping file on which to base the .xml file, and, optionally, the Smart 3D hierarchy location.

  10. Click OK to export the Smart Isometrics pipeline data to the .xml file.

    When processing completes, the software displays a message confirming the creation of the .xml file.

  11. Click OK to close the message, and then click File > Exit to exit Smart Isometrics.

  12. To import the Smart Isometrics pipeline data into Smart 3D, open the software, and load the workspace in which the pipeline is to be imported.

    To enable the piping import function in Smart 3D, the Intergraph Smart 3D PDS Model & Data Translators component must be installed. For more information, see the installation documentation delivered with Smart 3D.

  13. Click File > Import > Piping.

    The Import Piping Data dialog box displays.

  14. Specify the names and full path locations of the pipeline .xml file to be imported, the attribute mapping file, and the log file.

  15. Click OK to start the import process.

    The software constructs the pipeline in the graphic window and displays a confirmation message when processing is completed.

    The pipeline also displays in the Workspace Explorer.