You are now going to generate a multi-tag specification for pressure gauge instruments.
-
On the Specifications Module window toolbar, click (Open Spec).
-
On the Open Specification dialog box, do the following:
-
Under Item type, select Instrument.
-
Under Item number, type 101-PI -100.
-
Under Form number, type 8.
-
Click OK.
-
-
On the New Specification dialog box, select Create new multi-tag specification.
-
In the Document number box, check for 101-21-100001.
-
From the Format name list, select Pressure Gage SEE LIST.
-
Click OK.
-
In the Select Fluid State pop-up window, select Liquid and click OK.
In the data page, the fields that you selected to appear on the following page are marked as SEE LIST.
-
Enter the values in the spec sheet fields as shown.
For the maximum and operating pressure, in the field area, double-click the field to the left of the vertical field separating line and then select bar as the value for Unit and gage as the value for Scale.
-
On the toolbar, click (Multiple) to display the Multi-Tag List page.
-
Enter the following information:
-
In the Service column, increase the column width and type Heat exchanger inlet.
-
In the Minimum Range column, type 0.
-
In the Maximum Range column, type 20.
-
In the Range UOM column, select bar.
-
-
When done, on the Instrument Specification window toolbar, click .