Modify the Wiring Connection from the Enhanced Report Utility - Intergraph Smart Instrumentation - Training - Intergraph Process, Power & Marine Documentation

Intergraph Smart Instrumentation Tutorial

Language
English
Product
Intergraph Smart Instrumentation
Search by Category
Training
Smart Instrumentation Version
2018 (12.0)

Suppose that in loop 101-F-100, you want to move the connections in junction box 101-JB-DCS-001 from terminals 1+ and 1- to terminals 5+ and 5-.

  1. If you do not have the Enhanced Report for 101-F-100 on screen:

    1. In the Domain Explorer, select and then right-click loop 101-F-100.

    2. On the shortcut menu, click Reports > Generate Loop Drawings.

    3. On the Generate Loop Drawings dialog box, make sure that the Generation method list displays Enhanced Report, and then click OK.

    4. At the print preview prompt, click Yes.

  2. In the Enhanced Report Utility, click and zoom in on junction box 101-JB-DCS-001.

  3. Position the cursor over terminal strip TS-1 of junction box 101-JB-DCS-001 and select the label TS-1.

  4. On the Actions toolbar, click Connection > Connection Window ().

  5. In the Connection window, select cable C-101-FT-100 (on the left side of the terminal strip) and drag it to terminal 5+.

    SHARED Tip The window scrolls automatically if you drag the cable to the lower edge.

  6. On the Cable Connection Definition dialog box, make your cable connection definitions as shown.

  7. Click Connect to make the connection.

    The cable moves to its new position (with wires on terminals 5+, 5-, and 5sh) as shown:

  8. Click X to close the Connection window.

  9. Return to the Enhanced Report Utility.

  10. On the Actions toolbar, click to refresh the report and display the new connections.

    • If the Refresh command is not enabled, click a blank region of the drawing sheet first.

    • If, after clicking the Refresh command, the data fails to update, close and then reopen the Enhanced Report Utility.

  11. On the File menu, click Save As, and on the Save As dialog box, do the following:

    1. Type a name for the file and navigate to the folder where you want to save the file.

    2. In the Save as type list, select AutoCAD (*.dxf) and click Save. You can import the file saved in this format into SmartSketch, AutoCAD or MicroStation.

  12. Move the cable back to its original position and regenerate the Enhanced SmartLoop drawing.

  13. Click X to close the Enhanced Report Utility.