Copy Reference Cables with Sets and Wires - Intergraph Smart Instrumentation - Training - Intergraph Process, Power & Marine Documentation

Intergraph Smart Instrumentation Tutorial

Language
English
Product
Intergraph Smart Instrumentation
Search by Category
Training
Smart Instrumentation Version
2018 (12.0)
  1. Make sure that both the Domain Explorer and the Reference Explorer are open side by side. (Press F7 to open the Domain Explorer and F8 to open the Reference Explorer.)

  2. In the Reference Explorer, expand the Cables folder.

  3. Select cable 16 PAIRS WITH I/S and drag it to the Cables folder in the Domain Explorer.

  4. On the Cable Properties dialog box that opens, enter the cable data as shown.

    SHARED Tip To select the cable color, cable type or gland and glands, click to access the supporting table where you create the required item. This item will then become available in the appropriate list.

  5. When done, click OK.

  6. Define cable C-101-MR-DCS-001 as follows:

    1. In the Reference Explorer, select 8-PAIR CABLE and drag it to the Cables folder in the Domain Explorer.

    2. On the Cable Properties dialog box, enter the cable data as shown.

    3. Click OK.

  7. Define C-101-MR-DCS-002 as follows:

    1. In the Reference Explorer, select 4-PAIR CABLE and drag it to the Cables folder in the Domain Explorer.

    2. On the Cable Properties dialog box, enter the cable data as shown.

    3. Click OK.

  8. Create and define C-101-FI-201 as follows:

    1. In the Reference Explorer, select MY REF. PAIR cable and drag it to the Cables folder in the Domain Explorer.

    2. On the Cable Properties dialog box, change the Cable name to C-101-FI-201.

    3. Click OK.

You have just completed creating all the cables required for this tutorial.