-
On the Instrument Types dialog box, from the Process function list, select General.
-
Scroll down the Instrument Type list and select instrument type FY (with description I/P Transducer).
-
Click Profile to open the Instrument Type Profile dialog box.
-
On the General tab, click Copy From and then, do the following:
-
On the Copy Instrument Type Profile Data dialog box, from the Process function list, select Flow.
-
Select FT D/P Type Flow Transmitter, for which you defined a profile in the previous procedure.
-
Click OK.
-
In the message box notifying you that you cannot copy specification data, click OK.
-
-
On the General tab, in the I/O type group box, select AO from the list.
The General tab of the Instrument Type Profile dialog box should now appear as shown
-
Click the Wiring and Control System tab, and beside the Conventional connections group box options, click Properties and ensure that the wiring profile settings have been copied as shown.
-
Without making any changes, click OK to close the Conventional Connection Properties dialog box.
-
On the Instrument Type Profile dialog box, click OK to return to the Instrument Types dialog box.
-
Click Apply.
-
Select instrument type TY (with description I/P Transducer) and copy the profile definitions from FY.