Define Process Data for a Flowmeter - Intergraph Smart Instrumentation - 13.1 - Training - Intergraph Process, Power & Marine Documentation

Intergraph Smart Instrumentation Tutorial

Language
English
Product
Intergraph Smart Instrumentation
Search by Category
Training
Smart Instrumentation Version
13.1

In this procedure, you use the Process Data module options to define process data for instrument tag 101-FE-100 by copying process data from line
4"-P-1501-11H.

  1. On the module toolbar, click Instrument Instrument icon 16bit .

  2. On the Enter Tag Number dialog box, type the instrument tag number
    101-FE-100 and click OK.

    SHARED Tip Use the Tab key to move the cursor to the character separators.

  3. After the Process Data window opens, from the toolbar click Edit > Copy From > Line.

  4. Click OK to copy data from line 4"-P-1501-11H to the current flowmeter and open the Flowmeter Process Data window.

    SHARED Tip The software allows you to copy process data from a line on the fly in this way because you already assigned line 4"-P-1501-11H to tag number 101-FE-100 when defining the tag number properties.

    The PROPERTIES section should appear as shown:

    SHARED Tip Fields that are mandatory for calculations appear with either a cyan or yellow background. Cyan indicates that you must enter a value on the process data sheet. Yellow indicates that you may enter a value on the process data sheet, or you can leave it blank and enter a value for that field later on the calculation sheet.

  5. Scroll down to display the Additional Properties section, and type the values as shown.

  6. On the toolbar, click Save Icon 16bit (Save).

  7. On the toolbar, click (Report)

  8. Click Yes when prompted to open the report print preview.

  9. On the toolbar, click Revisions icon 16bit (Revisions).

  10. On the Revisions dialog box, type the revision data. For details, see Define Line Process Data.