It is possible to associate instrument blocks with specific instrument tags manually. In the Domain Explorer, manually associated blocks are indicated with the red icon.
-
In the Domain Explorer, double-click loop 101-F-100 to display the tag numbers.
-
Double-click tag 101-FT-100 to display the automatically associated block.
-
Right-click the Analog Input SmartSketch block.
-
On the shortcut menu, click Actions > Dissociate Instrument Blocks to dissociate the block.
-
When prompted, click Yes.
-
Right-click the 101-FT-100 tag.
-
On the shortcut menu, click Actions > Associate Instrument Blocks.
-
On the Associate Instrument Blocks dialog box, select block Analog Input SmartSketch as shown.
-
Click OK.
In the Domain Explorer, you now have one red block associated with tag 101-FT-100.
-
Right-click the Analog Input SmartSketch block assigned to tag 101-FT-100.
-
On the shortcut menu, click Reports > View Block in CAD Application to display the block drawing in your CAD application.
-
Check that the wiring macros show the correct group level and sequence for the wires, as in the following example.