Create a New Local Printer Port (64-bit server only) - Intergraph Smart Instrumentation - Installation & Upgrade - Intergraph

Intergraph Smart Instrumentation Installation and Upgrade Guide

Language
English
Product
Intergraph Smart Instrumentation
Search by Category
Installation & Upgrade
Smart Instrumentation Version
2018 (12.0)

If your SmartPlant Foundation server is installed on a 64-bit edition of Windows, perform the following procedure. This procedure is not necessary on 32-bit editions of Windows.

  1. Click Start > Printers and Faxes.

  2. Open the properties window for Amyuni PDF Converter.

    The printer named Amyuni PDF Converter is created automatically when Smart Instrumentation Title Block Component is installed.

  3. Click the Ports tab.

  4. Click Add Port.

  5. On the Printer Ports dialog box, select the Local Port, and then click New Port from the list.

  6. Type a port name in the Enter a port name box and click OK.

    You can enter any descriptive name, such as Amyuni PDF.

  7. On the Printer Ports dialog box, click Close.

  8. On the Ports window, check the new port in the list, if it is not already checked, and click Apply.

  9. Click OK to close the printer properties window.