The Secondary Terminal Strip pane provides information about the terminal strip that you selected in the Secondary terminal strip list and any existing cross wiring with this terminal strip. Note that when you work in the automatic cross-wiring mode, the Secondary Terminal Strip pane does not appear.
Term
This field displays the terminal belonging to the terminal strip you selected in the Secondary terminal strip list. The following symbols can appear next to the terminal name:
-
on the left or right side of a terminal indicates that this terminal has been cross-wired
on its left or right side. A turquoise screw head 
indicates that there are multiple connections on this terminal.
-
pointing to a terminal indicates that after clicking 
in the semiautomatic mode, the software has identified that this terminal has an
identical signal to the selected terminal on the primary terminal strip, and is recommended
for cross wiring.
Signal
This column displays the signal that originates from the cross-wired terminal on the primary terminal strip.
Level
This column displays the signal level.
In the example below, you can see that the software found a potential channel for
cross wiring and marked it with .
