You can filter items on a Cable Block Diagram by creating a filter in the Filter Definition dialog for the specific CBD.
-
In the Domain Explorer, open the Cable Block Diagrams folder located in the Drawings folder.
-
Right-click on the CBD that you want to apply a filter to, and select Filter.
-
On the Filter Definition dialog, under Filter name, type a name for your filter.
-
In the Filter Scope group box, under Item type, select the item type you want to filter, for example Cable.
If you are applying a filter to all the CBDs (by right-clicking on the Cable Block Diagrams folder) then only Item type: Block Diagram is available.
-
In the Filter definition group box, do the following:
-
From the Property list select the required property, for example Cable Type (Cable).
-
From the Operator list select an operator, for example =.
-
From the Value list select a value, for example Type A.
The Operators and Values available, vary depending on the property chosen from the Property list.
-
-
To add another definition to your filter, do one of the following:
-
If you want to use the same Item type, from the Logic list select an operator, select Add and then enter the next filter definition.
-
If you want to add a filter for a different item type, then select the item type from the Item type list, and then enter the next filter definition.
-
-
When you have finished adding filter definitions, select OK.
To clear a filter from the CBD, select the CBD in the Cable Block Diagrams folder, right-click and select Clear Filter.