Example 1: (a two-wire cable set)
The following connection type example illustrates how the connections are made for a 2-wire cable set when the skip between cable sets is 6:
The position of the + wire in each cable set to be connected has been assigned a skip of 0. The - wire of Set 1 has been assigned a skip of 1. The - wires of Sets 2 and 3 have each been assigned a skip of 6.
Example 2: (two wires with a jumper)
The following example illustrates how you can connect a single pair to a strip and create a jumper on the opposite side between the first and third terminals. The next pair will be connected to the third terminal, if the skip between sets parameter was set to 2.
The outcome of this operation, when terminating multiple pairs, will be pairs connected sequentially where every first wire in a set is connected by a jumper to the one that follows, as illustrated below:
