You use this procedure to disconnect a cable that has already been connected between 2 patch panels.
-
In the Domain or Telecom Explorer, navigate to the panel you want to disconnect from a cable.
-
Right-click and select Actions > Patch Wiring.
-
On the Patch Panel Wiring window, in the Primary Device pane, select the port you want to disconnect.
-
Select on the Cross Wiring tool bar.
-
Repeat this procedure to disconnect other cables.
-
Close the Patch Panel Wiring window when you are finished.
You can also disconnect a cable from the Connection window. For more details, see Disconnect Cables, Cable Sets, and Wires.