Only one set of tag calibration settings is allowed per tag. Therefore you should use the tag calibration settings to define tag-specific data such as alarm / trip points, input and output ranges, and units of measure. Other calibration values that are not tag-specific such as number of calibration points, tolerance, and so forth, can be stored in the calibration profile settings.
-
Start the Calibration module.
-
Select Actions > Tag Settings .
-
On the Enter Tag Number dialog, type the required tag number or select Find to search instrument tags.
If you selected multiple tag numbers, select Actions > Tag List or and then select a tag number to define the settings for that instrument.
-
Select Actions > Select Profile
-
Define the calibration settings values for the tags as required .
-
If you are defining calibration settings for a tag number associated with process data, you can copy existing process data minimum and maximum range values. For details, see Copy Existing Process Data.
-
If you are using the Standard Settings calibration sheet, the Measuring Point parameter is available for single point calibrations only.
-
If you are using the Standard Settings calibration sheet, the fields in the Set values group box are available only if under Calibration type, you selected Switch set point.
-
-
Select Save to save the settings.