Create a New Tag in the Calculation Module - Intergraph Smart Instrumentation - Help

You can create new tag numbers directly in the Calculation module, without having to open the Instrument Index module.

1. In the Calculation Module window, on the Edit menu, point to Calculate, and then select one of the following:

   • Flowmeter

   • Thermowell

   • Control Valve

   • Relief Valve

2. On the Enter Tag Number dialog, type the name of the new tag number, and select OK.

3. If the Select Instrument Type dialog opens (because there is more than one record for a given instrument type acronym), select the required instrument type and select OK.

4. On the Loop Name dialog, do one of the following:

   • Accept the displayed loop number and select OK.

   • Type the loop number that you need and select OK.

   • To create the tag number without a loop association, select Cancel.

5. On the Tag Number Properties dialog, on the General tab, enter the appropriate values.

6. Enter power supply values (for details, see Enter Power Supply Data for Panels and Instrument Tags).

7. If the Process Data dialog opens, select a fluid state and then select OK.

8. In the process data sheet, enter and save the relevant process data values.