Adapt System Codes - Intergraph Smart Instrumentation - Help

Intergraph Smart Instrumentation Help

Language
English
Product
Intergraph Smart Instrumentation
Search by Category
Help
Smart Instrumentation Version
13.1

You can adapt system codes and unit of measure codes only if you selected a source system. For a list of system codes you can adapt, see System Codes Table.

  1. Select System Codes > Adapt System Codes.

  2. In the Source System List dialog, select the source system whose codes you want to adapt. The available source systems are the ones you entered in the Source System List dialog.

  3. In the Adapt System Codes dialog, under Module, do one of the following:

    • Select All to make all properties available.

    • Select the Smart Instrumentation module whose properties you want to make available (Process Data, Wiring, or Calculation).

    • Select Other to make the properties available for all modules except for Process Data, Wiring, and Calculation.

  4. From the Code Values list, select the property whose codes need adapting.

  5. To set the code values, do the following:

    1. In the data window, select the Source Code field of the appropriate code. The selected Source Code field becomes editable (if the field color was light blue, it changes to white).

    2. Type the source value corresponding to the target system code value.

    3. To clear the currently selected source system code value, select Unused.

    4. To specify an additional source system code value for the target system code value currently selected in the data window, select Duplicate and type an additional value in the Source Code column of the new row.

      SHARED Tip You can only set the values of source codes where the Source Code field color is either light blue or white.

  6. Repeat steps 3 through 5 for every required Smart Instrumentation module.

  7. Repeat steps 2 through 6 for other source systems whose codes need adapting.

  8. Select OK to close the Adapt System Codes dialog.