You can add hub equipment to a hub cabinet. Hub equipment is a type of wiring equipment. After creating hub equipment, you can add a port and a hub connector.
-
In the Reference Explorer or Domain Explorer, expand the Telecom Panels folder.
-
Expand the Equipment Cabinets folder to display the existing hub cabinets.
-
Right-click a hub cabinet and then select New > Hub Equipment.
-
On the New Wiring Equipment dialog, type a name for the new hub equipment and then select OK.
-
On the General tab of the Wiring Equipment Properties – Hub dialog, type the name of the new hub.
-
Select the Double width check box if the hub occupies a double width slot or position.
-
In the Details group box do the following as you require:
-
Type a description.
-
Select a hub type, model, and manufacturer. If the required value is not available on the list, select
to define a new one.
-
Enter a sequence if you need to define the hub sequence.
-
-
Select the Category Properties tab.
-
Revise and modify category property values as you require. Select the value for each property and modify it as needed.
Wiring equipment categories that are shipped with Smart Instrumentation have predefined properties. You cannot delete or rename any of these categories or
their properties. You can only edit their values. However, you can add user-defined
properties to any category which you can rename or delete as you want. For details,
see Customize and Use Wiring Equipment Categories.
-
Select OK to accept your settings and close the dialog.