Create a Switch - Intergraph Smart Instrumentation - Help

Intergraph Smart Instrumentation Help

Language
English
Product
Intergraph Smart Instrumentation
Search by Category
Help
Smart Instrumentation Version
13.1

The software allows you to create switches after adding a rack to a PABX cabinet. After you have created a switch, you can add a switch port and a connector.

  1. In the Domain Explorer, expand the Telecom Panels folder, which is located within the Panels by Category folder.

  2. Expand the Equipment Cabinets folder to display the existing PABX cabinets.

  3. Double-click a PABX cabinet to display the existing PABX racks.

  4. Right-click a PABX rack to which you want to add a new switch and then select New > Switch.

  5. On the New Wiring Equipment dialog, type a name for the new switch and select OK.

  6. On the Wiring Equipment Properties – Switch dialog, on the General tab, under Name, accept or type a name of the new switch.

  7. Select the Double width check box if the amplifier occupies a double width slot or position.

  8. In the Details group box do the following as you require:

    1. Type a description.

    2. Select an amplifier type, model, and manufacturer. If the required value is not available on the list, select to define a new one.

    3. Enter a sequence if you need to define the switch sequence.

  9. Select the Category Properties tab.

  10. Revise and modify category property values as you require. Select the value for each property and modify it as needed.

    SHARED Tip Wiring equipment categories that are shipped with Smart Instrumentation have predefined properties. You cannot delete or rename any of these categories or their properties. You can only edit their values. However, you can add user-defined properties to any category which you can rename or delete as you want. For details, see Customize and Use Wiring Equipment Categories.

  11. Select OK to accept your settings and close the dialog.