Create a PA Cabinet - Intergraph Smart Instrumentation - Help

Intergraph Smart Instrumentation Help

Language
English
Product
Intergraph Smart Instrumentation
Search by Category
Help
Smart Instrumentation Version
13.1

This procedure explains how to create a PA cabinet.

Smart Instrumentation allows you to create a number of equipment cabinets that you can use for various purposes. After you have created the cabinets you require, you can create the appropriate equipment for each cabinet.

You can create an equipment cabinet in the Domain Explorer or the Reference Explorer. If you are creating an equipment cabinet that is going to have a frequently used configuration, we recommend that you create it in the Reference Explorer. Reference equipment cabinets facilitate fast creation of plant equipment cabinets by copying an existing cabinet configuration from the Reference Explorer to the Domain Explorer. However, if you want to create an equipment cabinet that does not have a configuration that you intend to use frequently, we recommend that you create it in the Domain Explorer and in the <unit> where it is to be physically located. This is helpful when filtering the panels in the current <unit>.

  1. In the Domain Explorer, double-click the Panels by Category folder and expand the Telecom Panels folder.

  2. Right-click the Equipment Cabinets folder and then on the shortcut menu select New > PA Cabinet.

  3. On the PA Cabinet Properties dialog, on the General tab, under Panel, type the name of the new cabinet.

  4. Select the required values from the Type, Manufacturer, Model, Area classification, and Location lists. If the required value is not available, select next to the relevant list arrow to open the appropriate supporting table.

  5. Under Dimensions, type a value for the cabinet dimensions if needed.

  6. Under Mounting, type a value if needed.

  7. Under Backplane, type a value if needed.

  8. Select the Set as intrinsically safe check box if this cabinet has intrinsic safety certification.

  9. Select the Associate Symbols tab to associate a symbol with the current cabinet. The software will use this symbol when generating a report in the Enhanced Report Utility. For details, see Associate a Symbol with an Item.

  10. Select Revisions to manage the revisions of the new cabinet if needed.

  11. Select OK to accept your definitions for the new cabinet and close this dialog.