Select a Graphic for a Terminal Connection - Intergraph Smart Instrumentation - Help

Intergraph Smart Instrumentation Help

Language
English
Product
Intergraph Smart Instrumentation
Search by Category
Help
Smart Instrumentation Version
13.1

This procedure explains how to replace the default screw head graphic that represents a terminal connection of a terminal in the Connection window and various Panel-Strip reports. You select a graphic for a particular terminal type and the number of wires connected to the terminal connection. That is, a specific graphic represents a connector type and whether there is no wire, a single wire, or multiple wires, connected on that particular side of the terminal.

  1. On the Wiring Module window menu bar, select Tables > Terminal > Types.

  2. On the Terminal Types dialog, select a terminal type or create a new one.

  3. Select in the G1 box to select a graphic that will represent a terminal connection with a single wire or without any wire.

  4. Select in the G2 box to select a graphic that will represent a terminal connection with a multiple wires.

  • The selected graphic appears in the G1, G2, or both boxes. The size of the G1 and G2 boxes represents the actual size of the icons that appear in the Connection window.

  • If you do not select anything in the G1 or G2 box, Smart Instrumentation displays the default gray screw head for terminal connections with or without single wires and the turquoise screw head PPM All Outputs Graphic for terminal connections with multiple wires.