Generate a Hybrid Case Spec - Intergraph Smart Instrumentation - Help

Intergraph Smart Instrumentation Help

Language
English
Product
Intergraph Smart Instrumentation
Search by Category
Help
Smart Instrumentation Version
13.1
  1. In the Specifications module, select Actions > Open Specification.

  2. On the Open Specification dialog, from the Item type list select Instrument.

  3. With the cursor in the Item number box, do the following:

    1. Select Find to open the Find Items dialog.

    2. Filter the grid for the parameters for the properties that you want to find.

  4. Select the instrument tag for which you have calculated a hybrid case in the Calculation module.

    SHARED Tip Under Search parameters, the Case list displays all the available cases defined in the Process Data module. However, the software does not indicate in the interface those instruments for which you calculated a hybrid case.

  5. On the Find Items dialog, select OK to accept your selection and return to the Open Specification dialog.

  6. With the cursor in the Form number box, do the following:

    1. Select Find to open the Select Specification Form dialog.

    2. Select the form #76, which designed for the control valve hybrid case, and then select OK.

    SHARED Tip The library form #76 is the library form supplied with Smart Instrumentation. This form contains columns that display minimum, normal, and maximum flow coefficient values (Cv/Kv) you calculated for the various cases in the Calculation module. If this form is not displayed in the Select Specification Form dialog, restore the supplied library forms.

  7. On the Open Specification dialog, select OK to open the New Specification dialog, and then proceed with spec creation.

See Also

Restore Library Forms