You can filter the items in the data window of the Global Revisions dialog when adding, updating, upgrading, or deleting revisions in batch mode. On the Wiring tab of the Global Revisions dialog, you can also filter the Wiring module items per report.
-
In the Global Revisions dialog, select one of the following tabs: Specifications, Process Data, Calculations, Loops, Hook-Ups, Wiring, or Dimensional Data.
-
If you accessed the Global Revisions dialog from the main Smart Instrumentation window, tabs for multiple modules are available; if you accessed the dialog from a specific module, then only the Settings tab and the tab for that module are available.
-
If you are working in an integrated environment, then regardless of where you access this dialog from, the following tabs are disabled: Specifications, Process Data, Loops, and Dimensional Data.
-
-
If you selected the Wiring tab, do the following:
-
Under Filter parameters, from the Report for list, select the item for which you want to apply revisions: Panels, Cables, or DCS/PLC.
-
From the Report type list, select a report type appropriate for the item you selected in the previous step.
To set new filter parameters, first select Clear.
-
-
For all tabs, under Filter parameters, type values in one or more of the text boxes to specify the parameters that you want to use for filtering the data.
-
Select the Display current <unit> data only check box to display the data in the current <unit>. Clear this check box to display all data at the level of the current <plant>.
On the Hook-Ups tab, data is filtered at the <plant> level only.
-
Select Activate filter to apply the filter parameters on the items.
If you select the Activate filter check box first, the software filters the data as you select or type the filter parameters.
-
Select Enable wildcard search to use a wildcard, if required, in your search.
-
The Enable wildcard search is enabled only when Activate filter has been selected.
-
The % character is used as the wildcard symbol in your filter.
-
-
Select Refresh to update the data window as needed.
-
Select Apply.