Rename a Single Loop Number - Intergraph Smart Instrumentation - Help

This option shows you how to rename a single loop number.

1. Start the Instrument Index Module by selecting Modules > Instrument Index

2. In the Instrument Index Module, select Edit > Loop Numbers > Loop Number Properties

3. In the Enter Loop Number dialog box type the name of the loop that you want to rename and select OK or do the following:

   1. In the Enter Loop Number dialog box, select Find without typing any loop number.

   2. Select the loop number from the data grid and select OK.

4. On the Loop Number Properties dialog box, select next to the Loop number field.

5. On the Rename Loop Number dialog box, type the new loop number name.

6. Select OK.

7. On the Loop Number Properties dialog box select OK.

• If you set the preferences to open the Rename Loop Drawing File dialog box after renaming a loop number, do the following to rename the file name of the associated CAD drawing. In the Rename Loop Drawing File dialog box, select a check box beside a file name. Type a new name over the name displayed in the New Drawing File column.

• If more than one file appears in the data window, the drawing type is multi-drawing.

• You can rename the drawing file name if the loop number that you are renaming is associated with a CAD loop drawing. To do this, set a preference on the Rename page of the Preferences Dialog box before performing this procedure. For more details see Set Preference for Renaming a CAD File from a Loop Number.

• Make sure that your new loop number name complies with the naming conventions for the current <unit>.

• All loop numbers must have unique names in the current <unit>.