The Intergraph Schematic Scheduler contains the Intergraph Schematic Scheduler Configuration Utility.
Configuration of the Intergraph Schematic Scheduler is intended for IT administrators
who manage the system's hardware and software.
-
Go to the Start
menu on the Windows taskbar and scroll to Intergraph Schematic Scheduler folder. -
Right-click Configuration Utility
and select Run as administrator.
-
Select the Product tab, and then the required product:: P&ID, SI, or SEL.
-
Select Add
from the Product tab on the bottom left panel.
-
In the Open File dialog, locate the Site's connection .ini file. Select the file then select Open.
-
Enter the Site Name in the Add New Site dialog, and then select Add.
-
The .INI Path gets populated on the next page. For example, the path in Smart Electrical and Smart P&ID is: "\\Site_Server_Name\Shared_Sites\Site_Name\smartplantv4.ini" and in Smart Instrumentation: "[drive]: \Program Files (x86)\SmartPlant\Instrumentation\Intools.ini".
The site you select must contain plants that are registered with HxGN SDx2.
-
On the Synchronization to SDx page, review the .INI file name that displays in the INI Path field.
-
Select min or hr in the Interval section and enter a numerical value in the box.
Minimum interval time is one hour and maximum interval time is 24 hours. Specify the default timing for querying the database for modifications.
-
Select
from the Structure Provider Path. -
In the Open File dialog, navigate to the Share Service, which is located in the path where the Shared Service was installed. For example, [drive] :\Program Files (x86)\SmartPlant\Electrical\Bin folder. Select HxGN.Schematic.I2.SEL.SiteInfoProvider.exe.
-
Select Save.
Remove a Site
-
Select
from the Product tab in the bottom left panel.
-
Select Remove, in the Alert notification that opens.
Select Save.