Controls how a drawing is printed. This dialog opens when you select File > Print.
Printer
Name
Specifies the printer that you want to use. You can select from a list of all the available configured printers. The information below the Name box applies to the selected printer. The printer that you select in the Name box is the default printer for the rest of the current design session until you specify a different printer.
Properties
Opens the Printer Document Properties dialog, which allows you to specify page setup and other printer settings specific to the selected printer.
Status
Describes the state of the selected printer, for example, busy or idle. This area is read-only.
Type
Displays the type of printer currently selected. This area is read-only.
Where
Identifies the printer path, printer port, queue name, or physical location of the currently selected printer. This area is read-only.
Comment
Displays additional information about the selected printer, if available.
Print range
All sheets
Prints all the existing sheets in the drawing.
Selected sheets
Prints only the sheets that you have selected in the drawing.
Sheets
Allows you to specify the sheets that you want to print. You can specify a range of pages that you want to print. You can type the starting page you want to print as the "From" value and the ending page you want to print as the "To" value. In the Sheets box, type a range with a hyphen between the sheet numbers. For example, to print sheets 3 through 7, type 3-7. This prints each sheet on a separate piece of paper.
Copies
Number of copies
Specifies the number of copies to print.
Collate
Organizes sheets when you print multiple copies.
Options
Print all layers
Instructs the software to print out all the existing layers in the drawing. If you clear this check box, only the items on the visible layers are printed out.
Pure black and white
Prints a black and white drawing without any other color or grayscale.
Apply display set (Available for batch printing only)
Select to print the selected drawings with a display set. Clear to print the selected drawings without a display set.
Active display set
Select Browse and select from the available display sets the display set to be applied to the drawings when printing.
The legend for the selected display sets is printed separately from the display sets.
Settings
Opens the Settings dialog, which allows you to set the scale and origin of the printout.