-
On the Draw toolbar, select the Ellipse by Center Point Command to open the Ellipse Ribbon.
-
Select the location for the center of the primary axis.
-
Select the location to end the primary axis. This action defines the length of the primary axis and the rotation angle.
-
Select a location on one side of the primary axis. This action defines the secondary axis.
The primary axis can be shorter than the secondary axis.
-
Instead of selecting to define the axes and rotation angle of the ellipse, you can type values on the ribbon. You can also use a combination of graphic and ribbon input.
-
Instead of selecting several different points to draw an ellipse, you can draw a diagonal line and the software automatically changes it to an ellipse.