Electrical Data Tab (Other Electrical Equipment Common Properties Dialog) - Intergraph Smart Electrical - Help - Hexagon

Intergraph Smart Electrical Help

Language
English
Product
Intergraph Smart Electrical
Search by Category
Help
Smart Electrical Version
10

Provides information about the load properties based on the output power requirements.

Electrical power

The software calculates the electrical power based on the load data. The values are all read-only. The software can perform the calculation at two operating points:

Rated

Maximum power.

Consumed

Normal operation at the operating power.

Active

Shows the quantity of electrical power in kW drawn from the network and supplied to the load that is actually converted to output power.

Reactive

Shows the quantity of reactive power in kVAR that the load draws from the network.

Apparent

Shows the quantity of electrical power in kVA that represents the vector sum of the active and reactive power. This quantity is the actual power that the network needs to generate.

Override FLA calculation

Select the required option to determine whether the software uses a calculated or manually typed full load current value. If you select Calculated, the software calculates the full load current value based on values you enter on the Load Data tab; the calculated value overwrites any value that you previously entered manually. Selecting Manual enables data entry in the Full load current box, with the last calculated full load current as the starting value.

Full load current (FLA)

The electrical current, in amperes, that the load draws from the supply when operating at maximum power. The full load current usually appears on the nameplate of the load. You can select Calculated or Manual from the Override FLA calculation list to determine whether the software calculates this value or whether you enter a value manually. When the load has an attached cable, the software copies this value to the cable and uses it as a default value for sizing the cable.

Manage Operating Cases

Opens the Manage Operating Cases dialog where you can add, edit, or delete property values specific to various plant operating cases that exist for the current plant item.