Sets options for defining the general properties of disconnect electrical equipment.
Item tag
Identifies the disconnect equipment. The item tag appears beside the disconnect equipment in the Electrical Index. The item tag matches the naming convention for the disconnect equipment. Select the ellipsis button to open a dialog where you can modify the tag segments that are editable.
Type
Displays the disconnect equipment type.
Last applied typical I/O set
Indicates the last typical I/O set of signals that you applied to the equipment, if appropriate. This information is read-only and appears only if you apply a typical I/O set by dragging it from the Reference Data Explorer or by applying options to the equipment.
Last applied typical schematic
Indicates the last typical schematic that you applied to the equipment, if appropriate. This information is read-only.
Assigned lookup table
Indicates the last lookup table that you applied to the equipment, if appropriate. This information is read-only.
Associated control stations
Displays a list of control stations associated with the equipment. This information is read-only and appears if you associated a control station with the load from the Control Station Common Properties dialog.
Item Tag
Displays the tag for the associated control station.
Type
Displays the reference control station when you create the associated plant control station by copying a reference control station from the Reference Data Explorer. For a control station that you created in the Electrical Index, no value appears in this column.
Associated I/O signals
Displays a list of all the I/O signals associated with the equipment. This information is read-only and appears if you associated an I/O signal with the disconnect equipment.
Item Tag
Displays the tag for the associated I/O signal.
Equipment Type
Displays the disconnect equipment type.
Description
Displays the description for the I/O signal, if entered.
I/O Type
Displays the I/O type defined for the signal, such as AO, AI, Fieldbus, and so forth.
Loop Number
Displays the loop number, if one exists, for signal data that you retrieved from Smart Instrumentation.