Provides information about the battery bank properties based on the output power requirements.
Rated active power
Shows the maximum quantity of electrical power, usually in kW, that the battery bank is able to supply to the network.
Rated voltage
Select the voltage which the battery bank is designed to supply. This quantity usually appears on the battery bank nameplate. You can define and customize the available rated voltages in the Data Dictionary Manager.
Override FLA calculation
Select the required option to determine whether the software uses a calculated or manually typed full load current value. If you select Calculated, the software calculates the full load current value based on values you enter on the Electrical Data tab. The calculated value overwrites any value that you previously entered manually. Selecting Manual enables data entry in the Full load current box, with the last calculated full load current as the starting value.
Full load current (FLA)
The electrical current, in amperes, that the battery bank supplies when operating at maximum power. The full load current usually appears on the nameplate of the battery bank. You can select Calculated or Manual from the Override FLA calculation list to determine whether the software calculates this value or whether you enter a value manually. When the battery bank has an attached cable, the software copies this value to the cable and uses it as a default value for sizing the cable.
Flooded seal
Select whether the battery bank seal type is flooded or not flooded.
Number of cells
Type the number of individual cells that make up the battery bank.
Float voltage
Allows you to select a battery float voltage from a standard set of values. The float voltage is the voltage that has to be applied to the battery to maintain its charge level.