Displays a list of the cables associated with the segment. The data on this tab is read-only. You make the actual associations on the Cable Common Properties dialog or on the Batch Route Cables dialog.
Item Tag
Identifies the cable. The cable tag appears beside the cable in the Electrical Index.
Formation
Displays information based on the total number and the size of the conductors or cable sets specified for the particular cable.
Weight / Length
Displays the weight per unit length of the cable. This value is important when filling the segment to ensure that the total weight per unit length of the cables in the segment does not exceed the maximum allowed value for the segment. This is the value assigned to the Weight Per Length property that appears in the Properties window.
Outside Diameter
Displays the outside diameter of the cable. When filling a segment, this value is important for validating that the accumulated outside diameter of the cables in the segment does not exceed the maximum allowed value for the segment in the case of an uncovered segment, or that the accumulated area of the cables does not exceed the maximum allowed area in the case of a covered segment. This is the value assigned to the Outside Diameter property that appears in the Properties window.