Specifies values for general profile properties that apply to loads in the Electrical Index.
Profile tag
Allows you to enter a tag name that identifies the profile.
Item type
Indicates the equipment type according to the folder in which you created the profile. The value is read-only.
Set as default
Defines this profile as the default for the specified equipment type when you apply a profile to a load.
Reference item
Allows you to select a reference item for copying the property values when you apply the profile.
Associated cables and cable assembly
Displays the reference cables and cable assembly that the software associates with the load when you apply the profile.
Cables
Describes the properties of the associated cables. In particular, this window shows the conductor arrangement.
Add
Opens the Select Reference Cable dialog to associate a new reference cable with the profile.
Edit
Opens the Select Reference Cable dialog to select a different reference cable for associating with the profile.
Remove
Removes the selected associated cable from the profile.
Cable assembly
Displays the reference cable assembly that you selected in the Find dialog.
Find
Opens the Find dialog where you can find an appropriate cable assembly for the current profile.
Remove
Removes the selected associated cable assembly from the profile.
Typical control station
Displays the names and descriptions of typical control stations that the software associates with the load when you apply the profile.
Control stations may have associated cables.
Add
Select to display all the available control stations on the Find dialog , where you can select a control station for the profile.
Remove
Removes the selected control station and its cable from the profile.