Self intersecting sweep path - Intergraph Smart 3D - Help - Hexagon
Intergraph Smart 3Dx Help
Language
English
Product
Intergraph Smart 3D
Subproduct
3Dx
Search by Category
Help
Smart 3D Version
13
Welcome to Smart 3Dx
Getting Started
What is a session file?
What is a workspace?
Modify Site Database Location Dialog
Exploring the Smart 3Dx Interface
Command Locations
File Menu
Edit Menu
View Menu
Insert Menu
Format Menu
Tools Menu
Project Menu
Tasks Menu
Civil Commands
Equipment Commands
Grids Commands
Piping Commands
Space Management Commands
Structure Commands
Systems and Specifications Commands
Windows Menu
Permissions Overview
Getting Help
Videos
What do you want to do?
What do you want to do in your design session?
Start a design session
Learn about session files and the workspace
Change the site database connection
Open a session file
Create a new session file
Remove a session file from the Recent Session Files list
Save a session file
Rename or move a session file
Use an existing session file
Define a workspace
Define a workspace using an existing filter
Find or select something
Find objects in the model
Limit the number of selectable objects (R)
Find a command (CTRL + Q)
Fence Selection
Filter what I see
Define a simple filter
Define an asking filter
Add a workspace filter
Edit a workspace filter
Rename a workspace filter
Move a workspace filter
Set the active filter
Add filters to my group
Remove filters from my group
Select all the filters in my group
Move around in the model
Zoom in or out
Pan the view
Fit objects in the view
Change the way I see my model
Dock a view
Undock a view
Rotate the view up or down
Rotate the view left or right
Rotate the view clockwise or counterclockwise
Rotate the view 180 degrees
Reposition the rotation triad
Set the rotation triad to the center of the view
Set the active view rotation plane
Display a named view
Create a named view
Find a named view
Display my most recently used named views
Change the name or description of a named view
Redefine a named view
Hide objects in the view
Show all of the hidden objects from a graphics view
Undo my last actions
Cancel your last action
Turn Undo on or off
Change the number of actions I can undo
Work more efficiently
Display the radial menu
Create a radial menu
Add commands to a radial menu
Add a submenu of commands to a radial menu
Remove commands from a radial menu
Navigate the radial menu using the numeric keypad
Define keyboard shortcuts
Take measurements
Measure a distance
Measure the minimum distance
Measure along an object
Measure the radius and diameter
Measure an angle by three points
Measure the angle between objects
Add construction graphics
Place a construction line
Place a construction linestring
Place a construction rectangle by direction and two points
Place a construction rectangle by three points
Place a construction circle by center
Place a construction circle by three points
Place a construction arc by center
Place a construction arc by three points
Set the working plane
Modify selected objects
Modify a select set with the same object type
Modify a select set with different object types
Move the selected objects
Rotate the selected objects
Copy and paste multiple objects by base point
Mirror copy selected objects
Use clipping volumes
Set a clipping volume by view
Set a clipping volume that fits my objects
Invert clipping
Disable a clipping plane
Create a named view from a clipping volume
Set a clipping volume by elevation plane
Turn off the clipping volume
Explore properties
Display the Properties view
Modify properties for a single object
Learn about editing multiple properties
Modify properties common to multiple objects
Modify a property on multiple objects
Modify properties for multiple objects in a grid
Display properties as text boxes in the active graphics view
Change the properties display
Create a custom property list
Work with the To Do List
Display the To Do List
Fix objects with errors
Fit an object on the To Do List in a view
Work with hierarchies
Work with systems
Add a new system
Move a system
Delete a system
Lock the Hierarchy Explorer
Navigate the Hierarchy Explorers using shortcuts
Hide objects in the hierarchy
Show specific hidden objects in the hierarchy
Show all of the hidden objects in the hierarchy
Copy and Paste
Mirror copy objects
Copy and Paste
Copy By Base Point and Paste
What do you want to do with equipment?
Equipment Keyboard Shortcuts
Add equipment
Place equipment from the catalog
Design a heat exchanger using shapes
Import equipment from a file
Modify equipment
Replace existing equipment
Move equipment
Rotate equipment
Add maintenance area to equipment
Modify a shape
Nozzles and ports
Add a piping nozzle to equipment
Add a piping elbow nozzle to equipment
Add a piping port to equipment
Add a ducting nozzle to equipment
Add a ducting port to equipment
Add a conduit port to equipment
Add a cabletray port to equipment
Add a cable port to equipment
Add a foundation port to equipment
Add a nozzle using the nozzle table
Move a nozzle or port
Modify nozzle or port dimensions
Remove a nozzle or port from equipment
Add components
Add an equipment component to equipment
Add a design equipment component to equipment
Add a shape to equipment
Use constraints
Mate equipment to a surface
Align equipment
Make equipment parallel
Mate equipment to a tangent plane
Connect equipment to a surface
Place equipment a fixed distance from another object
Delete a constraint
What do you want to do in grids?
Learn about grids
Create grids
Create a rectangular grid
Create a radial grid
Modify grids
Rotate a coordinate system
Move a grid plane
What do you want to do with piping?
Learn about piping
Piping Concepts
Piping Selection Shortcuts
Create systems, lines, runs
Create a piping system
Create a pipeline system
Create a pipe run
Route piping
Basic pipe routing
Route pipe offset from steel
Modify piping
Modify a pipe run
Modify a pipeline
Use Quick Pipe
Basic quick routing
Bypass a straight feature
Insert components
Insert a component on a skewed run
Insert a component a given distance from a pipe end
Insert an elbow at a pipe end
Insert a tee at a pipe end
What do you want to do in space management?
Place a volume
Place a volume by two points
Place a volume by four points
Place a volume by selection
Place a volume by path
Place a volume by grids
Place a volume by shape
Create a volume bound by spaces
Merge volumes
Create a space folder
Using the Space Folder command
Using the Space Hierarchy Explorer
Modify a volume
What do you want to do in structure?
Work with members
Place members
Place columns individually
Place beams individually
Place member at a precise distance
Modify members
Move member
Move member end
Work with slabs
Learn about Slabs
Slab Assembly Connections
Place slabs
Place a slab by object boundaries
Place a slab by drawing boundaries
Solve ambiguous boundaries
Modify slabs
Edit slab object boundaries
Edit slab drawn boundaries
Work with footings
Work with Single
Place a single column footing under one column
Place a single column footing under multiple columns
Place a single column footing at a point
Place a single column footing at multiple points
Work with Combined
Place a combined column footing
Place a combined column footing at points
Work with openings
Place opening by selected boundaries
Place opening by drawing boundaries
Work with design solids
Create a basic design solid
Your Design Session
Views
Graphic Views
View Manipulation Toolbar
Precision Input
View Cube
Advanced Rotation Options Dialog
Radial Menu (NUMPAD 5)
Graphic View Options Dialog
General Tab (Graphic View Options)
Layout Tab (Graphic View Options)
Aspects Tab (Graphic View Options)
Rendering Tab (Graphic View Options)
Lighting Tab (Graphic View Options)
QuickPick
Hierarchy Explorers
Search Results View
Name Set Dialog
Properties View
View Operations
Docking Views
Context Menus
Locate Filters
Selected Objects View
Named Views
Notifications Pane
Keyboard Shortcuts
Command Reference
Menu
Home Tab
View Tab
Space Management Tab
Piping Tab
Structural Tab
Window Tab
Commands A-F
1x3 Layout
2x2 Layout
Active Coordinate System
Coordinate System Dialog
Active Permission Group
Analysis Hierarchy Explorer
Annotation
Assembly Hierarchy Explorer
Background Bottom
Background Top
Center Selection Command (E)
Center View by Object Command (SHIFT + E)
Classic Layout Command
Clear Clipping Volume Command (CTRL + SHIFT + B)
Clip By Volume Command (CTRL+B)
Clip By Volume Controls
Close Magnifier on Select and Center of Gravity Options
Command Highlight
Command Select
Construction Graphics
Construction Graphics Controls
Coordinate System Command
Coordinate System Controls
Grids Dialog
Elevation Plane or Z Plane (Grids Dialog)
X Plane (Grids Dialog)
Y Plane (Grids Dialog)
Radial Plane (Grids Dialog)
Radial Cylinder (Grids Dialog)
Grids Naming Rules
Coordinate System Type
Copy Command (CTRL + C)
Copy By Base Point (CTRL + SHIFT + C)
Copy by Base Point Controls
Define Workspace (CTRL + W)
Define Workspace Dialog
Select Filter by Detailed View Dialog
Folder Properties Dialog
Delete (DELETE)
Design Equipment Command
Design Equipment Controls
Modify Design Equipment Controls
Display in Hierarchy Explorer
Dynamics
Equipment Command
Place Equipment Controls
Modify Equipment Controls
Insert Nozzle or Port Controls
Shape Controls
Select from Catalog Dialog
Equipment Nozzles Dialog
Place Equipment Component
Select Parent System Dialog
Place Import Shape Command
Place Import Shape Controls
Import Shape Dialog
Place Design Solid Command
Design Solid Controls
Order Shapes Dialog
Order Shapes Controls
Exit
Fit (F)
Footing Command
Footing Controls
Commands G-L
Global Highlight
Global Select
Handles
Help
Hidden Objects
Home View (Home) Command
Pipe Component Command
Insert Pipe Component Controls
Linear Member Command
Place Linear Member Controls
Modify Linear Member Controls
Frame Connections
Locate Filters
Edit Filter Group Dialog
Standard Tab (Edit Filter Group)
Custom Tab (Edit Filter Group)
Look at Surface (N)
Commands M-R
Measure
Measure Distance Between 2 Points Controls
Measure Minimum Distance Controls
Measure Distance Along Element Controls
Measure Radius and Diameter Controls
Measure Angle by 3 Points Controls
Measure Angle Between Objects Controls
Mirror Copy (CTRL + M)
Mirror Copy Controls
Modify Selection Controls
Modify Volume Command
Modify Volume Controls
Volume Modification Handles
Move
Named Views (V)
New (CTRL + N)
New Session Dialog
New Window
Next View Command (CTRL + SHIFT + RIGHT)
Open (CTRL + O)
Opening Command
Opening Controls
Options Dialog
General Tab (Options Dialog)
3D Model Tab (Options Dialog)
Units of Measure Tab (Options Dialog)
Customizations Tab (Options Dialog)
Edit Command Dialog
Add Radial Group Dialog
Pan (CTRL + SHIFT + P)
Paste (CTRL + V)
Paste Controls
Place Volume Command
Place Volume Controls
Previous View Command (CTRL + SHIFT + LEFT)
Properties
Ordered Properties List Editor Dialog
Properties Error Details Dialog
Properties Editor
Properties Editor Dialog
Properties Help
Quick Pipe Command
Quick Pipe Controls
Modify Dialog
Path Representation on Planes
Navigating the Path Options
R3D Hierarchy Explorer
Recent Session Files
Reference Hierarchy Explorer
Refresh Workspace (F5)
Reset Home View Command
Rotate Controls
Rotate View
Pipe Command
Route Pipe Controls
Pipe Run Controls
Select Run Dialog
Modify Pipe Along Leg Feature Controls
Modify Pipe Branch Feature Controls
Modify Pipe Branch Parent Controls
Modify Pipe Component Controls
Modify Pipe End Feature Controls
Modify Pipe Run Change Feature Controls
Modify Pipe Run Controls
Modify Pipe Stock Controls
Modify Pipe Straight Features Controls
Modify Piping Straight Nozzle Controls
Modify Pipe Turn Feature
Commands S-Z
Save (CTRL + S)
Save As (CTRL + SHIFT + S)
Select
Select by Filters
Select By Filters Dialog
Define Filter Dialog
Select Space Folder Dialog
Selection Browser
Set Home View (CTRL + SHIFT + HOME)
Single
Sketching Controls
Slab Command
Slab Controls
Space Folder Command
Space Folder Controls
Space Hierarchy Explorer
Standard Layout
Synchronize out of date occurrences in workspace
Synchronize Workspace with Catalog Dialog
Mark Out of Date Occurrences Dialog
System Hierarchy Explorer
To Do List
To Do List Dialog (SHIFT + T)
Undo (CTRL + Z)
Work Breakdown Structure (WBS) Hierarchy Explorer
X-Ray
Zoom (CTRL + SHIFT + Z)
Zoom Area
Troubleshooting
Error Logging
Error Messages
<...> is not a valid <property>. Check the unit spelling, and verify the numeric value
<...> is not a valid <property>. Fix the formatting of the unit string
<...> is not a valid <property>. Use a number between -1.797693E+308 and 1.79769313E+308
Smart 3Dx could not create the constraint
Smart 3Dx could not create the constraint because it is over defined
Smart 3Dx could not create the constraint because the current parameters do not create a valid constraint
Smart 3Dx could not create the constraint because there is no intersection
Smart 3Dx could not create the distance constraint
Smart 3Dx could not modify the constraint
Smart 3Dx could not process the constraint because at least one of the reference objects is invalid
Smart 3Dx encountered an unexpected failure
Cannot define the workspace. The selected filter does not generate a valid query.
An unexpected exception occurred during graphic placement. Please restart the command. If the problem persists, contact customer support
Cannot correlate the selected Smart 3D object with the selected P&ID design basis object because the object types are incompatible.
Cannot correlate the selected Smart 3D object with the selected P&ID design basis object because the parent objects are not correlated or do not exist.
Correlate with Design Basis Command
Current port configuration does not return valid Nominal Size values.
Failed to start the Construction Graphics command
Insufficient memory is available on this computer for Smart 3Dx to continue the command.
Invalid construction type input to command
License Management: Unable to reserve a seat
Not all of the properties could be updated.
Select a valid parent system to place the design solid
Select a valid parent system to place the equipment component or design equipment component
Select a valid parent system to place the equipment or design equipment
Select a valid parent system to place the nozzle
Select a valid parent system to place the shape
The command could not read the Catalog.xml file
The connection to the database server has been lost.
The filter data could not be retrieved from the database. Contact your administrator to verify the location and connection to the database.
The map file is invalid.
The object cannot be found in the database. It may have been deleted by another user. A refresh workspace is recommended.
The object was not located in the database. A refresh workspace is recommended.
The selected file: <file name> is not available
The session file cannot connect to the model database. The application will exit.
The site database and schema are in a version that is out of date
The software cannot find a database server that matches the name you provided
The software cannot find a database that matches the name you provided
The software cannot find the item in the catalog
The software cannot find the name generator server
The software cannot find the symbol share folder on the specified path
The software could not save the command changes because it could not validate the software license. Any changes that you have made since the last save are lost.
The software could not save the command changes because multiple people have made overlapping changes. Any changes that you have made since the last save are lost.
The software could not save the command changes because the Approval Status does not allow you to make those changes. Any changes that you have made since the last save are lost.
The software could not save the command changes. Any changes that you have made since the last save are lost.
The software encountered one or more errors processing entries of configuration xml file.
The software may not be able to save the command changes because it cannot validate the software license.
The software may not be able to save the command changes because multiple people have made overlapping changes.
The software may not be able to save the command changes because the Approval Status does not allow you to make those changes.
The software may not be able to save the command changes.
The target folder is not in working status
There was a problem creating a new folder
There was a problem deleting the filter. Delete the corresponding compound filters before deleting this filter.
There was a problem deleting the item named <name>
There was a problem establishing a connection to the catalog
There was a problem establishing a connection to the database
There was a problem establishing a connection to the model
There was a problem moving the item named <name>
There was a problem renaming the item named <name>
There was an error obtaining a site name.
There was an error processing the following filters.
This item is not in working status
This system parent does not have a status of Working. Select a parent system that has a status of Working
This value is no longer in the list. If you select a different value, you will not be able to return to this value.
Unexpected data integrity violation.
User does not have administrator privileges for this database. Contact your administrator.
To Do List Messages
What are To Do List Messages?
Mark Out of Date Occurrences Dialog
Civil To Do List Messages
A turn feature is too long, causing the length of a straight feature to be less than or equal to zero. Please revise the projection values of the adjacent turn feature or the sketch3D path.
Check system configuration. Unable to access symbol file.
Error in deleting trench run
Feature could not be generated, please revise the projection values for adjacent turn features
Invalid Sketch3D path, Trench Run cannot be computed for vertical paths.
Missing End Cross Section
Missing Feature
Missing Input - Material
Missing Input - Trench Composition
Missing Input - Trench Type
Missing main Input - Sketch3D path
Missing Start Cross Section
Self intersected path is not valid for the Trench Run. Revise the sketch3d path.
The bottom slope of the Trench Feature does not meet minimum bottom slope criteria of the selected Trench Type. Please check the inputs.
The computed depth for feature is less than zero. Please check slope inputs or revise sketch 3D path.
The computed start depth for Trench Run is less than zero. Please check slope inputs or Invert elevation inputs or revise sketch 3D path.
The object cannot be modified because the status for this object is not "Working". If you have permission then you can change the status to "Working" on the properties dialog
The Projection values cannot be equal or less than the Chamfer values. Please revise Chamfer and/or Projection value(s) from Trench turn feature property page.
This object is out of date.
Trench Run is not related to Cross section occurrence
Turn feature could not be generated with the provided inputs. Please change either Run Properties or Feature Properties.
Unable to apply cutout. Please revise header run.
Unable to create geometry for [Turn feature name] , since previous and next straight features are overlapping. Please revise ProjectionX and/or ProjectionY value(s).
You do not have permissions to access this object.
Common To Do List Messages
.NET Security Exception. Make sure your symbol share has adequate Code Access Security permissions
A member of the custom assembly has been deleted.
A Symbol of type <ProgID> with ID={OID} failed to calculate: check Error Log, Symbol values, and DLL version
Automation Error - Not enough storage is available to process the command
Can encountered an unexpected error.
Can't close log file.
Can't open log file.
Can't write text to the Tracker log file.
Can't write to the log file.
Custom Assembly member outputs do no match those in the catalog; to change the member outputs of a custom assembly, the version number in custom assembly source file must be incremented and a model re-synchronization performed.
Design Basis is correlated to Multiple SP3D Objects
Error computing the part geometry
Error during execution of a Parameter rule
Error during execution of the Aggregator Construct
Error during execution of the Aggregator final Construct
Error during execution of the Member Conditional
Error during execution of the Member Construct
Error during execution of the Member Count
Error during execution of the Member final Construct
Error during execution of the Member Release
Error during execution of the Selection rule
Error during Property evaluation
Error during removal of the Aggregator Inputs
Error during set of the Aggregator Inputs
Error during set of the Member Inputs
Error during the Symbol compute
Error from name rule
Error when computing this object
Error when computing this symbol
Error when deleting a relationship from this object
Error when deleting this object due to delay update
Error when deleting this object
Invalid input type (All Tasks)
Item not retrieved in catalog
Missing mandatory input
Name Rule DLL Not Found
Null pointer error
Object is in an invalid state because it cannot maintain its position on a referenced object. Redefine the object placement.
Object is in an invalid state because it was defined by the intersection of two objects that no longer intersect. Redefine the object placement.
Object is Out of Date
Object is out of date because the option to temporarily restrict edits was enabled by the user. Please disable the option to restrict edits before updating this object.
Object Not In Working Status
Object should be deleted
Part definition not found in reference data
Relationship to the SmartItem has disappeared
Root Selection not retrieved in catalog
Sketched curve lost a constraint to an input.
Symbol failed. <additional information>
Symbol failed. <symbol ProgID> threw the following error: <exception>. Please contact your admin.
Symbol failed. Method <content method> in <symbol ProgID> threw the following error: <exception>
The open boundary was closed by the TribonTranslator
The symbol definition DLL does not exist on the symbol share
The symbol definition entry is missing from symbol configuration XML files
This object is not synchronized with the catalog
This object is not synchronized with the symbol definition
This object is out of date
This object is out of date
This object is out of date
This object is out of date
This object is read only due to its working status
Too many inputs
Type not found
Unused Message
User attribute not found
Warning during execution of a Parameter rule
Warning during execution of the Aggregator Construct
Warning during execution of the Aggregator final Construct
Warning during execution of the Member Conditional
Warning during execution of the Member Construct
Warning during execution of the Member Count
Warning during execution of the Member final Construct
Warning during execution of the Member Release
Warning during execution of the Selection rule
Warning during Property evaluation
Warning during removal of the Aggregator Inputs
Warning during set of the Aggregator Inputs
Warning during set of the Member Inputs
Warning during the Symbol compute
Warning when Computing this object
Compartmentation To Do List Messages
Failed in Frame Naming Rule
Failed in Part Class Naming Rule
Failed in Part Description Naming Rule
Failed in Setting the Spatial Load Filter
Failed in Space Naming Rule
Failed in Spatial Load Computation
Failed in Unique Naming Rule
Failed in Unit Load Computation
Failed to Assign the Frame Names
Failed to Change the Compart Definition to Void Space Type
Failed to Evaluate the Center of Gravity
Failed to Evaluate the Compartment's Struct Tightness
Failed to Evaluate the Deck Height
Failed to Evaluate the Reference Position
Failed to Evaluate the Surface Area
Failed to Evaluate the Volume Molded Value
Failed to Evaluate the Wall Length
Failed to get the Merge Split Rule from the Catalog
Failed to get the Merge Split Rule ProgID
Failed to get the Rule ProgID
Multiple Errors, Please Check the Error Log
Void Space Part Class Not Found in the Catalog
Equipment To Do List Messages
Bend Length is less than Bend Radius. Nozzle graphics cannot be computed. Set the Bend Length value to greater than or equal to Bend Radius.
Bend Length, Bend Radius, Pipe Diameter, Nozzle Length or Bend Angle is zero. Nozzle graphics cannot be computed. Ensure those property values are greater than zero.
Bend Radius is less than half the piping outside diameter. Nozzle graphics cannot be computed. Set the Bend Radius value greater than or equal to half the piping outside diameter.
Constraint is Over Defined
Corner Radius is greater than half of width or depth. Nozzle graphics cannot be computed. Set the Corner Radius value to less than half of width or depth (whichever is smaller).
Corner Radius is less than zero. Nozzle graphics cannot be computed. Set the Corner Radius value to greater than or equal to zero.
Distance Constraint: Direction of measurement does not intersect external surface.
Equipment Custom Assembly Unspecified Error 1
Equipment Custom Assembly Unspecified Error 2
Equipment SmartOccurrence Unspecified Error 1
Equipment SmartOccurrence Unspecified Error 2
Error constructing the Datum Shape
Error during execution of the Aggregator Construct
Error during execution of the Member Count
Error during the Symbol compute
Error in constructing Equipment foundation port
Error in constructing the Nozzle as a member of Equipment
Error in evaluating properties
Error in orienting the Nozzle to the predefined inputs of CAD
Error in repositioning the Datum Shape
Failed to compute surface area for the Designed Solid
Failed to compute the volume and center of gravity for the Designed Solid
Failed to start Solid Edge application. The solid edge object cannot placed or modified. Check the installation of Solid Edge.
Flange Thickness is less than zero and Nozzle Length is less than Flange Radius. Nozzle graphics cannot be computed. Set Flange Thickness greater than zero and Nozzle Length greater than Flange Radius.
Flange Thickness is less than zero. Nozzle graphics cannot be computed. Set the Flange Thickness value to greater than or equal to zero.
FlangeDiameter or PipeDiameter or FlangeThickness or PipeLength is less than zero. Nozzle graphics cannot be computed. Ensure those property values are greater than zero.
Imported Shape SAT file contains more than one Body
Imported Shape SAT file is Invalid
Inconsistent Constraint
Invalid Shape object - does not support IJShapeSolid interface
Item not retrieved in catalog
No cached geometry for the Shape object
Nozzle Length is less than Bend Radius or Bend Length excluding Flange Thickness is less than Bend Radius. Nozzle graphics cannot be computed. Set Nozzle Length greater than Bend Radius and Bend Length excluding Flange Thickness greater than Bend Radius.
Nozzle Length is less than Bend Radius. Nozzle graphics cannot be computed. Set the Nozzle Length value to greater than or equal to Bend Radius.
Nozzle Length is less than zero. Nozzle graphics cannot be computed. Set the Nozzle Length value to greater than zero.
Nozzle Location attribute N2 cannot be less than or equal to N3 for Skew/Offset Skew Type
Nozzle Location attribute N2 cannot be negative
Nozzle width or depth is zero. Nozzle graphics cannot be computed. Set the Nozzle width and depth value to greater than zero.
Object is out of date
Part corresponding to the <part> representation is not found in the Solid Edge Assembly. The solid edge object cannot be placed or modified. Check the assembly.
Plane and Axis: Axis does not intersect the surface for Nozzle
Plane and Axis: Plane and/or Axis missing for Nozzle
Relationship to the SmartItem has disappeared
Sat file has memory leaks. Graphics are not updated with the source file, the original shape graphics are retained. Correct the .sat file.
Sat file is Empty. Graphics are not updated with the source file, the original shape graphics are retained. Correct the .sat file.
Shape cannot be stitched
Shape does not contain any geometry
Stitching operation failed for Designed Solid with given Shape inputs
Subtract operation failed on Designed Solid with given Shape inputs
Symbol failed. The imported shape source file is not found in the path. Graphics are not updated with the source file, the original shape graphics are retained. Place the file in the source file location.
Tangent Constraint: Line does not intersect the external surface
The .dgn file being imported contains some invalid geometries. These are ignored during the import operation. Correct the .dgn file to view all geometries.
The .dgn file contents are not valid for the specified file type. Graphics are not updated with the source file, the original shape graphics are retained. Correct the .dgn file.
The .dgn file has unsupported formats. Graphics are not updated with the source file, the original shape graphics are retained. Correct the .dgn file.
The .dgn file is not accessible. Graphics are not updated with the source file, the original shape graphics are retained. Make the dgn file accessible.
The .dgn file units are either incorrect or not defined. Graphics are not updated with the source file, the original shape graphics are retained. Correct the file with proper units of measure.
The .sat file being imported contains some invalid geometries. These are ignored during the import operation. Correct the .sat file to view all geometries.
The .vue file being imported contains some invalid geometries. These are ignored during the import operation. Correct the .vue file to view all geometries.
The Cross Section Curve of Prismatic shape is either not planar or degenerate. Prismatic Shape graphics cannot be computed. Make sure that the Cross Section Curve is planar and non degenerate.
The cross section curve of Prismatic shape is either self intersecting or not a planar. Prismatic Shape graphics cannot be computed. Make sure that the Cross Section Curve is planar and non self intersecting.
The Cross Section Curve of Prismatic shape is not closed. Prismatic Shape graphics cannot be computed. Make sure that the Cross Section Curve is closed.
The equipment exceeded the maximum size limit due to the imported shape(s) under it. This may cause a performance impact to downstream workflows. Please move the imported shape(s) to different equipment or delete, simplify, and re-import the shape(s).
The first shape in a design solid cannot be a subtract shape. Reorder the shapes in the design solid so that the first shape in the list is an addition shape.
The foundation port graphics cannot be created with given circular holes information. The graphics of the foundation port is invalid. Ensure that number of holes and bolt hole diameter values are correct in order to create proper graphics of the foundati
The foundation port graphics cannot be created with given rectangular holes information. The graphics of the foundation port is invalid. Ensure that number of holes in X and Y directions and distance between holes in X and Y directions are correct in ord
The foundation port graphics cannot be created with given X and Y coordinates of the holes. The graphics of the foundation port is invalid. Correct the X and Y coordinate values in order to create proper graphics of the foundation port.
The imported file size is more than <number> MB. This may cause performance issues with Define Workspace and Drawing Updates. Please try to simplify the file to reduce its size.
The imported file size is more than <number> MB. This would cause a large performance impact to Define Workspace and Drawing Update performance. Please try to simplify the file to reduce its size.
The imported shape cannot be created with the given file. The original shape graphics are retained. Correct the imported shape file.
The mirror behavior option for this part in catalog is ‘Cannot be Mirrored’. But mirror operation has been performed on this occurrence.
The nozzle is missing the datum point, shape, or design solid used to position the nozzle. Associate the nozzle to a new reference object, or delete the nozzle.
The Reference Geometry used is not valid for this placement type.
The symbol definition of this nozzle occurrence is mismatch with the symbol definition provided in the Port Graphics.xml
Thickness is less than zero. Nozzle graphics cannot be computed. Set the Thickness value to greater than or equal to zero.
Unable to compute equipment surface area
Unable to compute equipment volume
Unable to compute equipment weight and CG values due to a child object having a weight or CG value that is undefined.
Unable to generate monikers for the edge and vertex ports on the solid; shape hence, this shape cannot be added to the resulting solid.
Unable to open solid edge file $1. The solid edge object cannot placed or modified. Check the file location.
Unexpected error while reading the file. Graphics are not updated with the source file, the original shape graphics are retained. Correct the file.
Unexpected failure.
Vue file is invalid. Graphics are not updated with the source file, the original shape graphics are retained. Correct the vue file.
Warning during execution of the Aggregator Construct.
Warning during the Symbol compute.
Hangers and Supports To Do List Messages
Access Denied.
Access Denied.
Assembly Info Rule CLSID cannot be retrieved from its ProgID
Assembly Info Rule object cannot be retrieved from its CLSID.
Assembly Info Rule ProgID cannot be retrieved from the support object.
Attributes cannot be retrieved from hanger rule object
Catalog Parts were not obtained from Assembly Information Rule.
Error when Deleting a Relationship from this Object
Error when deleting this object
Hangers & Supports: Support Information Rule is not properly defined
Hangers & Supports: The supporting structure is not appropriate for this support. Please choose a support...
Hangers & Supports: Unable to assemble the selected support
Hangers & Supports: Unable to create part object for selected support
Hangers & Supports: Unable to get part for selected support
No Connections between the Part Occurrences and the Supported Ports.
No Connections between the Part Occurrences and the Supporting Ports.
No Joints Evaluated
No PartOccurrences Created by PartOccurrence assembly.
No Supported Connections Obtained from Assembly Information Rule.
No Supporting Connections Obtained from Assembly Information Rule.
Object is Out of Date.
Part class object cannot be retrieved from its name
Part object cannot be retrieved from its name
Port connection problem, bad size.
Port connection problem, part port has bad unit type in DB
Port connection problem, part port too big.
Port connection problem, part port too small.
Port connection problem, support port too big.
Port connection problem, support port too small.
Port service ProgID cannot be retrieved for connectable object
Support joints code could not be solved for this support. This support could not be computed and is invalid. Adjust the geometry of the route or supporting objects, or adjust the support code.
Support located outside the Boundaries of the Input Objects.
Supporting object is not located properly for this support. Support is invalid without a supporting object. Move or change the route or structure to correct the problem.
Supporting object or face has been deleted or cannot be found. Support is invalid without supporting item. Connect to another supporting object or face.
The ports are not type compatible between the parts '$1' and '$2'. Change one of the parts to a compatible part type.
The Support component WCG calculation failed.
The supported or supporting object is moved or rotated.
The supported or supporting object has been moved or rotated or deleted
Unknown Error
Hole Management To Do List Messages
Error when Deleting a Relationship from this hole.
Error when deleting this hole.
Hole aspect geometry of selected outfitting(s) is non-circular. Please revise.
No intersection is found between ‘Outfitting/Equipment Hole Aspect’ and ‘Structure(s)’. Please revise inputs.
Outfitting object connected to this trace is deleted, please review the trace
The semantic could not get the required inputs from this hole.
This approved hole had a problem updating
This hole could not store necessary information about the Structure
This hole had a problem dealing with the Stand-Alone Plate
This hole had a problem running the Fitting Selection rules
This hole had a problem setting its parent system
This hole had a problem updating its properties.
This hole had a problem updating its symbol properties.
This hole had a problem updating the Clearance Rule
This hole had a problem updating the cuts on the Structure
This hole is out of date.
This object cannot be modified because the status for this object is not "Working". If you have permission then you can change the status to...
Trace was not computed as it did not result to close curve geometry. Review outfitting and structure geometry.
Unknown error.
You do not have permission to access this hole
Molded Forms To Do List Messages
A common surface cannot be found using the specified Molded direction on the lapped plate.
A part which forms a boundary on this part has been deleted. This should happen only when the boundary system is split. Re-execute the semantic from the To-Do list once the system split is complete.
A required parameter is missing or of the wrong type
A required parameter is missing or of the wrong type
A required parameter is missing or of the wrong type
A required parameter is missing, empty, or invalid
A required parameter is missing, empty, or invalid
A single point intersection does not exist between support 1 and support 2 of the plane by elements
A trappable error was raised, but no error description is available. No further information is available
A trappable error was raised, but no error description is available. No further information is available
A trappable error was raised, no further information is available
An operator with multiple signature cannot create its bigger than needed solid operator
An unspecified error in Plate creation/modification was received
Bounding landing curve does not intersect the bounded landing curve
Can not apply mounting angle to ER on a non-planar edge. Select planar edge.
Can not get pattern modify flag
Can not get profile system output
Can not get revision object
Can not get section symbol
Can not get symbol information
Can not invalidate or set result type
Cannot apply final trim to the input geometry. The Active Entity does not exist in the geometry's history
Cannot bound the curve by its boundaries. The boundaries do not intersect the curve
Cannot create a ruled surface between two points. Change one of the inputs to an edge port or curve.
Cannot create the leaf systems during the split
Cannot create the logical connection because the object does not contact the boundary
Cannot create the logical connection between the profile system and the parent plate system
Cannot create/modify logical connection between the two objects
Cannot define a planar plate edge reinforcement on a non-planar plate
Cannot define a plate edge reinforcement on an open edge. The contour represented by the edge must be closed.
Cannot determine if the two connectable objects are connected. Failure in IJConnectable->IsConnectedTo
Cannot invalidate weight and CG
Cannot mark output dirty
Cannot set batch reentry flag
Cannot set semantic pattern info
Cannot update an object for which the user has no permission or who's working status is Approved
Closed tubular plates are not manufacturable. The tube must be split by at least two axial seams.
Compute of the bracket could not complete because delay is on for Molded Forms
Compute of the connected systems could not complete because delay is on for Molded Forms.
Compute of the logical connection could not complete because delay is on for Molded Forms
Compute of the logical connection could not complete because delay is on for Molded Forms
Compute of the plate system plane could not complete because delay is on for Molded Forms
Could not bound the plate with the selected edge. Only free edges on root plate systems are valid as plate system boundaries.
Could not connect the relation
Could not construct a topological plane with the input 3D plane
Could not construct a unique plane with the given supports. The supports may result in three colinear points.
Could not create a required helper utility or class
Could not create assembly connections
Could not create the geometry factory. Ensure that Geom3d.dll is installed and registered
Could not create the Geometry Info Helper. Ensure that Geometry Topology is properly registered. Also check the System Path
Could not create the GeomOps helper. Ensure that GeomOps.dll is installed and registered
Could not create the model geometry from the topology data
Could not create the offset surface for the plate part
Could not extend one of the edges of a boundary part in order to trim the surface
Could not find the approximate center and normal of the surface
Could not find the initial geometry defining the standalone plate part
Could not find the matching solid by the boundaries of the surface
Could not get POM from object
Could not get profile part boundaries.
Could not get Revision Object
Could not get the orientation geometries of the surface
Could not identify the appropriate leaf system to use as the tripping bracket support
Could not initialize pattern info
Could not migrate root to leaf physical connection
Could not modify the model geometry from the topology data
Could not modify the relation
Could not preprocess the landing curve
Could not recursively get struct entity
Could not retrieve flange points. Ensure that the points are defined on the plate edge
Could not retrieve the boundary contour. Flanges on unbounded plates are not supported at this time.
Could not retrieve the geometry of the plate system. Cannot determine if the lapped plate laps this system.
Could not retrieve the moniker from the port
Could not retrieve the parent of the incoming plate part. The plate part appears to be orphaned.
Could not retrieve the parent plate system from the plate part
Could not retrieve the passive entity of this operation
Could not retrieve the persistent object manager from the object
Could not retrieve the planar plates active entity. Ensure that the meta-data is up to date
Could not retrieve the ports from the plate part or plate system
Could not retrieve the result of the operation. Verify that all relationships are properly established
Could not retrieve the StructOperation_OPRND origin object. Check the meta-data
Could not retrieve the supported element from the active entity. Check the meta-data
Could not retrieve the surface geometry used to create the lapped plate system or part.
Could not retrieve the tripping bracket rule from the catalog. Ensure that its PROGID is bulkloaded and that it is properly registered.
Could not set minus face as base face
Could not solve the ambiguity
Could not split the ruled surface at its discontinuities. The resulting surface cannot be thickened.
Could not update bounded plate parts. Failed to retrieve the plate part's bounded geometry.
Design seam failed to split the plate
Design seam failed to split the plate system
Error computing the logical or physical connection.
Error creating reference curve on surface. Possible memory problem.
Error creating/modifying landing curve by intersection
Error creating/modifying landing curve by offset
Error creating/modifying landing curve by projection
Error creating/modifying landing curve by table
Error creating/modifying landing curve of edge reinforcement
Error creating/modifying landing curve of tripping stiffener
Error creating/modifying seam geometry
Error getting the OID
Error in Beam generation
Error in bounding the plate. The plate may have too many boundaries or invalid boundaries.
Error in creating/modifying beam system geometry
Error in creating/modifying child plate
Error in creating/modifying Plane by Elements.
Error in creating/modifying Plane by Offset
Error in creating/modifying Plane by Three Points
Error in creating/modifying profile system geometry
Error in creating/modifying the landing curve
Error in the inputs used to create or modify a plane by angle
Error in the inputs used to create or modify a plane by elements
Error in the inputs used to create or modify a plane by offset
Error in the inputs used to create or modify a plane by point and normal
Error in the inputs used to create or modify a plane by three points
Error in the inputs used to create or modify a plane by two points and a projection direction
Error in the inputs used to create or modify a plane by vector normal
Error in the inputs used to create or modify plane geometry
Error putting the control flags
Error when computing this object
Error when computing this symbol.
Failed during computation of the landing curve between elements
Failed In trimming and thickening. The offset of the part due to an offset connection has failed.
Failed to add attributes and moniker data to the surface. The plate will not display properly.
Failed to Add the Entity to the Revision Mgr.
Failed to analyze multi-split during straking split
Failed to analyze split process
Failed to apply the boundaries and their pattern for the plate being created or modified
Failed to blend surface
Failed to check bracket solutions
Failed to create a root connection between the plate and one of its boundaries
Failed to create connections between the leaf parts of a straking split
Failed to create model geometry from topology data
Failed to create or modify a plate by offset while thickening its geometry
Failed to create or modify a plate's geometry while thickening and trimming
Failed to create or modify a plate's geometry while thickening and trimming
Failed to create or modify a plate's geometry while thickening and trimming
Failed to create or modify a plate's geometry while thickening and trimming
Failed to create or modify a plate's geometry while thickening and trimming
Failed to create or modify the plane by elements object. The specified constraint type is not applicable for the current configuration.
Failed to create or modify the plane by elements. You might not have the proper permissions or the object is in the approved state.
Failed to Create Revision Manager
Failed to create the beam part
Failed to create the beam system
Failed to create the edge reinforcement profile part
Failed to create the landing curve offset
Failed to create the necessary B-spline curve from the input complex string
Failed to create the necessary degenerate line between two points
Failed to Create the Plane Value Entity.
Failed to create the plate part - XLS
Failed to create the plate part report data entity
Failed to create the plate system
Failed to create the profile part
Failed to create the profile part report data
Failed to create the profile system
Failed to create the root connection between the plate and one of its boundaries. Proper contact between the molded surfaces does not exist.
Failed to create the ruled surface geometry
Failed to create the ruled surface geometry. The curves were unable to create the proper geometry.
Failed to create the ruled surface geometry. The selected port is not continuous or failed to extract the port's geometry.
Failed to create the ruled surface geometry. The surface will not display.
Failed to create the ruled surface geometry. Unable to get 3D lines from the geometry factory.
Failed to create the seam
Failed to create the seam on a knuckled surface because a zero offset was provided
Failed to create the seam point.
Failed to create the sketched landing curve
Failed to create the stand alone plate stiffener
Failed to create the standalone plate part
Failed to Create the Struct Free Edge Entity
Failed to Create the Struct Free Edge Occurrence Entity
Failed to Create the Struct Opening Occurrence Entity
Failed to Create the Struct Plane3d Entity
Failed to Create the Struct Sketch Reference Collection Entity
Failed to create the structural connection
Failed to create the structural opening
Failed to create the tripping stiffener part
Failed to create/modify a connection between the plate and the edge reinforcement
Failed to create/modify a connection between the two leaf plates or two leaf profiles or two edge reinforcements.
Failed to create/modify a connection between two leaf profiles or two edge reinforcements
Failed to create/modify a plane by elements. The bracket may not recompute. - XLS
Failed to create/modify advanced plate system
Failed to create/modify bracket plate system
Failed to create/modify bracket reinforcement. Check bracket selection/reinforcement rules.
Failed to create/modify connection between plate and profile (plate bounded by profile)
Failed to create/modify connection between plate and profile (plate penetrated by profile)
Failed to create/modify connection between the plate and the member system
Failed to create/modify connection between the two objects in profile bounded by member
Failed to create/modify connection between the two objects in profile bounded by plate
Failed to create/modify connection between the two objects in profile bounded by profile
Failed to create/modify connection between the two objects in profile intersected by member
Failed to create/modify connection between the two objects in profile intersected by plate
Failed to create/modify connection between the two objects in profile intersected by profile
Failed to create/modify connection between the two objects in profile lapped by plate
Failed to create/modify connection between the two objects in profile lapped by profile
Failed to create/modify connection between two plates (intersected)
Failed to create/modify connection between two plates (plate bounded by plate)
Failed to create/modify connection between two plates (plate lapped by plate)
Failed to create/modify imported plate system
Failed to create/modify linear extruded plate system
Failed to create/modify non-linear extruded plate system
Failed to create/modify plate flange
Failed to create/modify plate intersected by member connection
Failed to create/modify plate lapped by member connection
Failed to create/modify profile system geometry. Verify the landing curve, boundaries, cross-section, twist, orientation.
Failed to create/modify reference curve on surface
Failed to create/modify revolved plate system
Failed to establish a required relationship. Ensure that ShipStructure.xml is current and has been properly applied to the database
Failed to establish the input relationships for this operation. Ensure that the meta-data is up to date
Failed to generate the object name. Verify that the input objects are not on the To Do List and require updating.
Failed to generate the profile part. The profile part cannot be split with the planning seam.
Failed to generate/apply contour/boundaries of bracket. Check bracket catalog/symbol/selection rules.
Failed to get index list from collection
Failed to get the splitting surfaces
Failed to get topology
Failed to migrate deleted output
Failed to modify the cutout
Failed to obtain the IJDObject interface on the Entity being constructed.
Failed to place the cutout
Failed to place/modify plate cutout
Failed to process the plate knuckles on an imported plate. The plate surface is not marked for knuckles
Failed to retrieve graphics in modifying the ruled plate
Failed to retrieve one or more of the connected elements for the landing curve between the elements.
Failed to retrieve the Active Entity for this Compute / Part
Failed to retrieve the connectable object from the port
Failed to retrieve the input for determining the profile system's geometry
Failed to retrieve the input reference surface for defining the plate part's geometry
Failed to retrieve the original landing curve prior to bounding required by the bounding process
Failed to retrieve the plate to be stiffened. While processing the landing curve between elements, the plate being stiffened was not found as an input.
Failed to retrieve the profile's landing curve
Failed to retrieve the referenced surface body defining a standalone plate part's geometry
Failed to retrieve the RuledSurface operations inputs.
Failed to retrieve the top and bottom input curves for the ruled surface.
Failed to retrieve the tripping bracket orientation vectors which are used in identifying the bracket's initial points
Failed to set Report Data on Part with Report Data
Failed to set the boundaries for this landing curve
Failed to set the wire body geometry for the reference curve. The reference curve will not display properly.
Failed to split connection
Failed to split the profile
Failed to split the profile part
Failed to split the profile part with the straking seam
Failed to split the profile system with a design split
Failed to Thicken Sheet
Failed to trim by one of the boundaries identified as a penetration. Trimming by closed edge reinforcements...
Failed to trim by one of the boundaries identified as an offset contour
Failed to update after changing persistent data. Manually recompute object
Failed to update body data
Failed to update connection display
Failed while setting Batch Reentry
Failure to modify the shallow copy
Failure to retrieve the system boundaries for the plate part or the plate part geometries.
Geometry filename is not valid
Invalid argument in method call
Invalid argument.
Invalid Argument. Cannot apply Final trim to a stand-alone plate part
Invalid bend angle. Angle must be between 45 and 175 degrees
Invalid class id for profile knuckle rule 'PRKProfileKnuckleInit'. Verify that class id is registered.
Invalid molded direction. Lapped plates must use Port, Starboard, Aft, Forward, Above or Below.
Invalid or missing Argument. (Molded Forms)
Invalid program id for profile knuckle rule 'PRKProfileKnuckleInit'. Verify that program id is registered.
Invalid tripping stiffener construction. One end must connect to a structural object.
Invalid. NULL or empty input parameter.
Landing curve bound was stopped due to delay propagation
Missing one or more supports for the bracket. Check bracket supports and select the missing supports.
Missing or empty parameter
More than one possible solution was found when creating the system-derived plate part. Any ambiguities must be resolved at the system level.
No contact exists between the plate and the profile used to split the plate
No solution possible with the given inputs or a non-specific error in the Stiffener Between Elements Rule.
One of the brackets supports is shorter than the specified bracket edge length
One of the connecting systems is either missing or displays on the To Do List
One or both connected elements are inadequately sized to support a lapped connection
One or more connected leaf systems are de-activated. Please modify/delete the system or activate the connected leaf system.
One or more connected leaf systems are delayed
One or more of the input parameters is the wrong type. Valid Types are curves, points or ports
One or more of the specified boundaries has no geometry or failed to retrieve it
Planning seam failed to split the plate
Planning seam failed to split the plate part
Plate has no dimensions. Plate thickness is not available. - XLS
Plate is not cut by opening because the opening contour does not project onto the plate.
Plate name is read only for now
Plate part generation could not complete because delay is on for Molded Forms
Plate System bound could not complete because delay is on for Molded Forms
Plate system split was stopped because delay is on for Molded Forms
Plate system split was stopped because delay is on for Molded Forms
Plate system split was stopped because delay is on for Molded Forms
Plate system split was stopped because delay is on for Molded Forms
Plate systems can not be used as a boundaries for a landing curve
Profile system split was stopped because delay is on for Molded Forms
Profiles on the same surface used as a tripping bracket supports must have different heights
Reference curve of the offset profile has been deleted
Reference Object used to define a point on the surface in the landing curve table has been deleted
Reference Object used to define a point on the surface in the landing curve table has been deleted
Reference object used to define a point on the surface in the landing curve table has been moved and is no longer intersecting the base surface
Required parameters are missing or of wrong types
Sketching plane used for Sketch2D was deleted
Some or all of the boundaries were not retrievable for the processing of the plate part
Straking seam failed to split the plate
Straking seam failed to split the plate part
The boundaries do not form a closed surface
The boundaries of a planar plate part edge reinforcement can only have one or two plate edge reinforcement contours. In this case there is either none or too many.
The boundary is invalid. Please check the inputs. A boundary must intersect the object it is to bound.
The bounded seam or the seam boudaries are not valid seams. If the original DB is older than the version 6.1, retry a migration otherwise contact your support
The bounding process failed while attempting to determine whether the input information had been modified
The connection between the plate system being detailed and one of its boundaries is missing. Detailed parts cannot be generated on this system.
The creation of a common operator for the bigger than needed solid has failed
The creation of the assembly connection at seam position has failed because the surface is oversized
The creation of the assembly connection at the penetration position has failed because the surface is oversized
The creation of the plate by plate assembly connection has failed because the surface is oversized
The creation of the special assembly connections has failed
The final trim of the plate part's geometry failed. The part geometry is not accurate
The final trim of the plate part's geometry failed. The part geometry is not accurate.
The geometry of the connected systems might have limited contact between the systems, or an existing boundary was modified.
The IJPort set as input is not of the correct type. It must be a PortEdge or PortVertex(when available)
The input complex string is poorly formed. Could not retrieve its curve count
The input Wire Body is Non-Planar. This method works only for planar wire bodies
The landing curve have multiple disconnected portion, which is not supported. Please modify the inputs to re-create it.
The leaf system of the logical connection is missing, or the logical connection is not updated
The logical connection could have a missing leaf system, or the connected leaf systems are not updated
The logical connection has ambiguous geometry and was not created
The migrate method for plane failed. The wrong leaf system(s) may be in use. Modify the object connecting to the leaf(s).
The name for this object was computed but could not be assigned
The object on the origin side of the CreatePlatePart_OPRND or the GeneratePlatePart_OPRND relationship could not be retrieved. Is this...
The object on the origin side of the CreatePlatePartRef_GEOM relationship could not be retrieved. Check meta data
The offset of the surface has failed in the process of thickening and trimming the plate
The operation for bounding the landing curve was not retrievable
The plate boundaries do not form a closed surface. Detailing will fail.
The plate boundaries for a plate system are no longer valid, or the plate system logical connections need to be updated
The plate part's geometry could not be persisted in the model database
The profile boundary is invalid. A boundary must intersect the object it is to bound.
The profile needs to be split at the split knuckle before the detailing can be processed.
The seam or knuckle cannot split the plate system
The seam point cannot split the landing curve of a profile
The Semantic found more than two inputs. Remove them
The specified fixed coordinate is not a constraint within the range of the plane by elements. The fixed coordinate is either too large or too small for the current offset distance.
The suppression of the signature on the bigger than needed solid lateral faces has failed
The trimming operation to build the bigger than needed solid has failed
The tripping bracket rule reports that no solution is possible with the given inputs
The tripping stiffener rule reports a general failure. Ensure that it is properly registered
The utility function ::MergeEnumerators unexpectedly failed
There is a contact between the two plates but the overlapping geometry (common edge) do not have the right signature. You have perhaps coincident operator that overrode it. Fix the model or contact your support.
There is insufficient information to define a stand-alone plate part
There is no contact between the two root systems, the root connection may be fixed
There was no contact between the edge reinforcement and the reinforced edge port
There was no contact between the plate and its bounding profile
There was no contact between the profile and member
There was no contact between the stiffener and its support
There was no contact between the two profiles
This configuration has no free point. This plane cannot be constrained
This object's name was unable to be computed.
Unable to initialize arguments. Unexpected failure in the semantic argument initialization. Check if the root connection is still valid
Unable to initialize generic semantic arguments. Might be a bad argument error. Check if the root connection is still valid
Unable to retrieve root systems connected to this root connection and their respective design split. Check if the root connection is still valid
Unable to retrieve the bound operation or the boundary in the plate graph. Please check that the connection is still valid and that the plate and its boundary are OK. Otherwise contact your support.
Unable to retrieve the bound operation or the boundary in the profile graph. Please check that the connection is still valid and that the profile and its boundary are OK. Otherwise contact your support.
Unable to retrieve the connection signature. Check if the root connection is still valid
Unable to retrieve the edge reinforcement generation operation or its defining port. Please check that they are still valid or contact your support.
Unable to retrieve the internal contacts for this seam. Check the seam geometry
Unable to retrieve the ports to connect to a leaf connection.
Unable to retrieve the split operation or the relationship between the seam point or knuckle point
Unable to retrieve the split operation or the splitter in the plate graph. Please check that the connection is still valid and that the plate and its splitter are OK. Otherwise contact your support.
Unable to retrieve the split operation or the splitter in the profile graph. Please check that the connection is still valid and that the profile and its splitter are OK. Otherwise contact your support.
Unexpected error in a leaf connection port update, please contact your support.
Unexpected error in the contact management
Unexpected error in the internal connection management
Unexpected error in the management of a single connection
Unexpected error when we check the validity of a connected port of the leaf system
Unexpected error when we filter the input leaf connections
Unexpected error when we get the intersection seam corresponding to the penetration between the profiles. Please contact your support.
Unexpected error when we set the lumpId attribute on the surface replacing the stiffener
Unexpected error when we try to check the validity of an existing leaf connection
Unexpected error when we try to create the surface replacing the stiffener
Unexpected error when we try to get the ports that are in a split context (i.e. the connection is at a split position).
Unexpected error when we try to get the profile section orientation at the contact position. Please contact your support.
Unexpected error when we try to get the right face port of the leaf plate system. Please contact your support.
Unexpected error when we try to know if a region connection is inversed
Unexpected error when we update a port of an existing leaf connection
Unexpected failure when we call the filter to get the signature corresponding to the connection signature. Check if the root connection is valid
Unexpected failure when we delete the obsolete connections
Unexpected failure when we get the signature to manage
Unexpected failure when we get the signature to skip
Unexpected failure when we try to retrieve a leaf connection in the inputs map
Unexpected failure when we update the connection geometry
Unknown constraint. Valid constraints are PBE_PARALLEL, PBE_PEPRPENDICULAR, PBE_TRANSVERSE, PBE_VERTICAL, PBE_LONGITUDINAL, PBE_FIXED_X, PBE_FIXED_Y and PBE_FIXED_Z
Unknown error during the semantic compute
Unknown Type.
Unspecified error.
We are not able to get a valid port on the operand leaf system. Please check the port definition (signature, geometry).
We are not able to get a valid port on the operator leaf system. Please check that the operator is valid (not already in TDL). Otherwise contact your support.
We did not find any contact between the operand plate and its operator profile.
We did not find any contact between the operand profile and its operator plate, please check the validity of the connection (bound or intersection has succeeded). Otherwise contact your support.
We did not found any valid contact (i.e. with the right signature). Check if the root connection is valid
Wrong Plate System. Custom Geometry Collection must contain (only) the parent system of the plate part
Piping, HVAC, and Electrical To Do List Messages
A required part could not be located in the catalog. Reference data should be checked to verify that the required part is included in the piping job specification and is available in the catalog
A temperature-based insulation exclusion rule has been defined for this component type; however, the owning run has no temperature...
An attempt has been made to delete a connection item. These objects are system-generated and cannot be selected and deleted directly.
At least one branch from a turn exists in this cableway that is only valid for a "no-part" configuration. The cableway has been...
Bolt length cannot be calculated due to incomplete bolt extension data! To correct this error...
Both ends of the cable are not connected to equipment.
Branch nominal diameter is larger than header nominal diameter
Branch reinforcement calculations could not be made due to an instantiation error
Branch reinforcement calculations could not be made. The software component used to perform these calculations has not been registered...
Branch reinforcement calculations could not be made. The software component used to perform...
Cable is out of date. Needs to be recomputed
Cannot delete connected Tap Feature without deleting Tapped Feature too.
Cannot delete run change feature.
Catalog Connection Part has been deleted.
Clamp Part not found. Please check commodity filter and catalog data for proper clamp specification.
Could not update the port.
Density of material not available in catalog. Usually this is for an insulation material. Please check/correct the...
Duct thickness value not found in the 'MinimumDuctThicknessRule' for the cross section used to route the Run/Feature.
Due to a change affecting tray fill calculations, the Max Fill property needs to be updated.
Enclosed features cannot be deleted. Select and delete the enclosed run if crosssection need to be modified.
Error updating symbol
Error when deleting a relationship from this object
Feature nominal size is different from the stock primary size.
Feature Overlapping
Features belonging to Flex Runs cannot be deleted. Select and delete the run that owns the feature.
Flared pipe cannot be placed. Lap length and lap thickness are not defined for the current nominal diameter and schedule/thickness combination in the Flared Pipe rule.
Flared pipe cannot be placed. The Flared Pipe rule is not defined in the catalog.
In the catalog, there exists multiple Material Control Data records for the piping component.
Incompatible Component Selected
Insulation thickness not defined
Invalid bend angle of the part
Invalid branching
Invalid connected ports in flex routing
Invalid Connection
Invalid cross section selected on run/feature
Invalid data encountered
Invalid Flex type or mismatch in assembly data
Invalid Gasket Procurement Thickness
Invalid Location of the Tap
Invalid Material Control Data
Invalid NPD Equivalency
Invalid Nut Material Control Data
Invalid or no Flex parts found in reference data
Invalid purchase length is defined for pipe stock
Invalid rotation angle
Invalid Short Code
Invalid specification
Invalid Tap Definition
Invalid Washer Material Control Data
Invalid Weld Information
Material thickness is less than the minimum permissible value
Minimum duct thickness rule is not defined for this duct specification
Minimum length of pipe cannot be inserted in pipe run due to lack of write permissions.
Minimum lengths could not be retrieved due to lack of die data. Check the Pipe Bending Die Data table in reference data to ensure...
Minimum Pipe Length Violation
Mismatch in port locations
No Barrier part found in Catalog
No Bend Radii defined in catalog data
No bend type or bending machine data found for the bend configuration. Check reference data to ensure this bend...
No density value could be retrieved for the process fluid. Wet weight calculations may be impacted as a result. Reference data...
No design standard has been defined on the current piping specification. Please check your catalog data to...
No Female Threaded x Female Threaded Mating Part Found
No Female Threaded x Female Welded Mating Part Found
No gasket found
No inline header feature found for branch or surface mount feature
No insulation spec
No Male Threaded x Male Threaded Mating Part Found
No Male Threaded x Male Welded Mating Part Found
No mating flange found
No mating part found
No minimum tangent lengths found for this bend type, NPD, piping spec, and angle combination. Check reference data to ensure minimum length data has been properly defined.
No part definition could be retrieved. The associated part definition has been removed from the catalog since this item's placement...
No part definition could be retrieved. The part being requested is not properly defined in the catalog data or is not included in the commodity filter being referenced.
No part definition could be retrieved. The required part definition has been removed from the catalog since this item’s placement in the model....
No Part Found for Bolt, Nut and Washer Connection.
No part found for run change feature.
No Part Found for stock part
No Part Found for the Gasket
No part found for the given branch header short code and size.
No part found for the given branch short code
No part found for a turn feature in the catalog data (Piping, HVAC, Electrical)
No part found in catalog data
No part found in catalog data, for the specified pressure/temperature values.
No part in the spec for the specified ALF component short code
No part in the spec for the specified ALF ENDLEG short code
No Rounded Bolt Length
No valid entry defined in the corrosion allowance rule.
No valid entry defined in the Materials Data rule.
No valid entry defined in the Minimum Pipe Length rule.
No Weld Gap Value Defined
No Weld Representation Data Available
Nominal Size and End Prep Combination Not Found in Flange Setback Table. No Setback Distance Returned. Please Check Your Reference Data.
Not enough room to insert the component
One end of the cable is not connected to any equipment.
One or more connection item (weld, gasket, nuts/bolts, etc) could not be created due to read-only status of connecting parts.
Orientation inconsistent
Overlap of this feature with its adjacent feature is not solvable
Part not suitable for branch angle
Part not suitable for turn angle
Parts cannot be deleted. Select and delete the feature that generated the part.
Parts with more than one offline port cannot be selected by specification. Parts with one offline port can be selected by specification...
Pipe elongation cannot be calculated. Elongation values are not defined for the current nominal diameter and bend angle combination in the Pipe Bend Elongation rule.
Positioning Violation
Preferred Minimum Pipe Length Violation
Reference data specifies that cap screws should be substituted for this connection object; however, the required commodity code...
Required area and pad thickness could not be calculated for branch reinforcement. Reference data should be checked...
Required data cannot be found for the bending machine mapped to this piping material class and nominal size. Check reference data to ensure...
Run change feature out of date
Run has inconsistent flow direction. Please run the custom command ValidateFlowDirCmd.ValidateFlowDir to resolve this problem
Single pipe run traverses three ports of a branching connection. This will cause problems correlating to P&ID where the same situation is not allowed.
Straight feature in pipe bend doesn't meet minimum length requirement for manufacturability.
Symbol definition not found for clamp. Please verify that symbol is properly defined in catalog and that symbol is loaded.
Symbol not found for along leg feature
Symbol not found for base part
Symbol not found for branch feature
Symbol not found for feature
Symbol not found for feature
Symbol not found for mating parts
Symbol not found for surface mounted feature
Symbol not found for turn feature
Symbol processor failed for clamp. Please validate inputs to symbol processor.
Temperature and pressure values for the pipe run are invalid because the Service Limits rule has changed.
The Allowable minimum bend radius of cable is greater than bend radii of bends in path.
The default or entered transition length exceeds the available space.
The entry for the cable is not specified or missing.
The exit for the cable is not specified or missing.
The feature cannot be deleted because attributes values on adjacent feature are not equivalent
The feature cannot be deleted because its tap is access denied.
The feature cannot be deleted because its tap is not in working status.
The feature must belong to the run specified in the design basis
The flow direction of one of the ports of this part is inconsistent with the flow direction of the run it belongs to. The flow direction of the run or the port should be modified to resolve the inconsistency.
The insulation specification associated with the object has been removed from the catalog.
The insulation specification does not include an insulation thickness for this combination of Nominal Diameter and Insulation Temperature...
The leg's designed slope is smaller than the run's minimum slope. Use Modify Slope to correct the slope of leg or decrease the minimum slope of the run.
The material associated with the object has been removed from the catalog.
The material density is not defined for the stock part.
The Maximum or Minimum Temperature value of the part prohibits placement on the pipe run. Verify that a valid temperature value has...
The parent part for the tap has been deleted. Because it requires the part, the tap has also been deleted.
The piping material class and nominal size of this bend piece have not been mapped to a bending machine. Check reference data to ensure...
The Project Options indicate that bolt commodity substitution is enabled. However, there is no corresponding data defined in the ‘Bolt Commodity Code Substitution” rule. Please ensure appropriate data is defined in the catalog.
The routed cable path is not continuous.
The short code of the part is not defined in the Short Code Hierarchy rule.
The specification associated with the object has been removed from the Catalog.
The specified action could not be completed because no allowable nominal diameters have been defined for the selected piping specification.
The specified feature cannot be inserted. The surrounding objects cannot be repositioned as required.
This object cannot be modified because the run status is not "Working". If you have permission, then you can change the run status to...
This object cannot be modified because the status for this object is not "Working". If you have permission then you can change the status...
This object cannot be modified because the supporting feature status is not "Working". If you have permission then you can change the status...
Two runs are connected with opposing or inconsistent flow directions. One of the runs should be selected and the flow direction...
Unable to process the associated connections.
Unable to refresh length attribute on pipe part due to read-only status. Cut length or modeled length may need updating.
Unknown Error
Unknown error encountered while processing connection object. Probably due to wrong catalog data.
Wall-thickness calculations could not be made due to an instantiation error in calculation component. If this component has been customized, your programmer should...
Wall-thickness calculations could not be made. The software component used to perform these calculations has not been defined. Please check that...
Wall-thickness calculations could not be made. The software component used to perform these calculations has not...
Warning - Minimum Permissible Pipe Length Violation
Weld clearance volume cannot be constructed due to inadequate reference data.
You do not have permission to access the supporting feature.
You do not have permission to access this object.
You do not have permission to access this run.
You do not have permission to access this SIO Run or its related objects.
Planning To Do List Messages
Access Denied.
Error creating this object.
Error in Deleting RelationShip.
Error in PatternInfo function.
Error in QueryInterface.
Error in Setting the parent.
Error updating this object.
Error when deleting this object.
Invalid Inputs.
No intersection for this landing curve. Delete the curve or modify the inputs so an intersection exists.
This object is out of date.
Unknown error.
Space Management To Do List Messages
Either the points are coinciding or they lie in a plane along the co-ordinate system.
Existing space geometry is not proper.
Failed to get graphics from sketched path or cross section.
Failed to get graphics from the Sketch Cross Section.
Failed to get Symbol graphics of cross section.
Failed to retrieve the input primitive shape object.
Failed to retrieve the orientation of the co-ordinate system attached to the cross section.
Graphics for the volume could not be created.
Graphics for the volume could not be generated.
Graphics for the volume could not be modified.
Inputs of the Space could not be retrieved.
More than the required number of input points are given.
No co-ordinate system is attached to the cross section.
Offset values are equal.
Projections of the fence points on the Reference Plane are collinear.
The input point(s) does not have Graphics.
The skinning process failed to generate Graphics.
The Volume's catalog definition is not found in the catalog. Delete the volume or select a catalog definition
Unexpected error while trying to retrieve the location of the space.
Unexpected failure while trying to update the changes.
Structural Analysis To Do List Messages
Boundary condition's analysis model is different from the member part's analysis model.
Computing the boundary condition failed.
Computing the load failed.
Distributed load's start and end positions are the same.
Invalid load magnitude (cannot be zero)
Item not associated to an Analysis Model
Load does not have an assigned load case.
The load's absolute position is beyond the end of the member.
Two or more boundary conditions are attached to the same frame connection or coincident frame connections.
Structural Detailing To Do List Messages
A collar must have one and only one input. The input collection (enumeration) is empty.
A collar must have one and only one input. There are too many items in the input collection
A parameter required by this method is invalid, NULL, or does not support a required interface
A required input argument is missing, empty or does not support a required interface
A trappable error was raised, but no error description is available. Check the localizer component
A trappable error was raised, but no error description is available. No further information is available
Access Denied
An error occurred in the PartGeometry Helper
An input argument was NULL
An input parameter is null or of the wrong type
An unexpected error occurred with one of the input entities
An unexpected error occurred. No further details are available
An unexpected error occurred. No further details are available
An unidentified error was raised. No further information is available
Assembly Connections need to be Regenerated due to PG failure (Structural Detailing)
At most, two boundaries may be chosen to trim a profile part
Base Direction
Cannot retrieve the definitions for the symbol
Cannot retrieve the definitions from the symbol
Cannot retrieve the symbol for the chamfer
Cannot retrieve the symbol for the Feature
Could not add an existing feature to the collection of current features
Could not add the object to the Revision Manager
Could not add the plate's openings to the collection of boundaries
Could not apply a valid context to the plate faces created by this Chamfer cut. Objects bounded by this plate will not trim properly
Could not combine the collections of inputs
Could not compute the section offset
Could not compute the thickness and edge reinforcement offsets
Could not connect the output relation
Could not create an enumerator from the input arguments
Could not create enumerator from array
Could not create the collection of boundary elements
Could not create the collection of features
Could not create the cutting tool.
Could not create the enumerator
Could not create the Geometry helper object
Could not create the geometry misc helper
Could not create the Miscellaneous GeometryHelper object
Could not create the naming solver
Could not create the part's naming solver - reverting to default name
Could not create the relationship graph
Could not create the relationship graph
Could not create the Struct Entity Factory
Could not create the symbol entity factory
Could not enumerate the new list of boundaries
Could not establish the result relationship
Could not find a symbol representation with the specified name
Could not find an input with the specified name in the Collar symbol's definition
Could not get part solid from system solid
Could not get profile part boundaries
Could not get reverse flags
Could not get the connected plates
Could not get the Custom Geometry
Could not get the IEnumJDArgument interface
Could not get the IJDInputs Interface from the symbol definition
Could not get the IJDInputsArg interface
Could not get the IJDRepresentations argument from the feature
Could not get the IJDStructGeometry interface
Could not get the IJDStructGraphicClassId interface
Could not get the IJPort Interface
Could not get the IJStructStateInterface
Could not get the persistent object manager
Could not get the profile object
Could not get the profile system's orientation
Could not get the profile's input symbol
Could not get the region collection
Could not get the representation name
Could not get the representations from the symbol definition
Could not get the symbol occurrence's output
Could not get the symbol's Aspect
Could not get the values arg from the collar's symbol (IJDSymbol->get_IJDValuesArg failed)
Could not get trim candidates
Could not get trim objects
Could not initialize and/or get the topology services singleton
Could not instantiate an instance of the Struct Detailing Geometry Helper
Could not locate element in association graph
Could not modify cutout
Could not modify model geometry from topology data
Could not modify the twisted stiffener
Could not obtain the active entity for this operation
Could not place cutout
Could not place merged body from collection
Could not query stiffened plate's interface
Could not query the output state's interface
Could not query the symbol section's interface
Could not retrieve a collection of inputs
Could not retrieve a required utility object. Ensure that GeomOperations.dll and Geom3d.dll are registered
Could not retrieve a valid thickness from the collar plate. Ensure that the collar supports plate dimensions
Could not retrieve plate input
Could not retrieve profile molded conventions
Could not retrieve the 3D attribute wire body from the profile symbol
Could not retrieve the Argument object
Could not retrieve the associated geometry object
Could not retrieve the Class ID from the Prog ID
Could not retrieve the cutout input (CSketchFeature) from the relationship
Could not retrieve the destination (operator) from a relationship
Could not retrieve the existing feature (operator)
Could not retrieve the feature's Symbol Interface
Could not retrieve the IJDEditJDArgument from the symbol
Could not retrieve the IJDStructCustomGeometry interface
Could not retrieve the IJDSymboDefinition interface from the feature's symbol
Could not retrieve the IJGraphicEntity interface
Could not retrieve the IJGraphicRepresentation of the profile part
Could not retrieve the IJStructApplyOperation interface
Could not retrieve the IJStructGeometry interface
Could not retrieve the IJSystemChild interface for the profile part
Could not retrieve the index of the specified input
Could not retrieve the input corresponding to the input name
Could not retrieve the input geometry (light part geometry)
Could not retrieve the input profile cross section
Could not retrieve the input to this semantic
Could not retrieve the Object ID from the Active Entity
Could not retrieve the Operation ID for the Active entity
Could not retrieve the Operation ID for the Active entity
Could not retrieve the operator for this operation
Could not retrieve the output of this operation. Check the SetCustomGeometry method
Could not retrieve the output's name
Could not retrieve the persistent object manager. Ensure core is registered properly
Could not retrieve the plate's geometry
Could not retrieve the profile's web thickness offset
Could not retrieve the References Argument from the symbol
Could not retrieve the references collection from the Symbol, or it does not support a required interface
Could not retrieve the result of this operation
Could not retrieve the stiffener's parent plate thickness
Could not retrieve the symbol definition from the collar's symbol
Could not retrieve the symbol inputs
Could not retrieve the symbol representation
Could not retrieve the Symbol's definition
Could not retrieve the symbol's IJDInputsArg interface
Could not retrieve the symbol's IJDOccurrence interface
Could not retrieve the symbol's IJDReferencesArg interface
Could not retrieve the symbol's IJDSymbolDefinition interface
Could not retrieve the symbol's representation output
Could not set the input to the create collar operation. Ensure that the relationship...
Could not set the Struct Geometry
Could not solve the ambiguity
Distance is not within the tolerance
Error creating group monitor
Error during execution of the member conditional
Error in compute struct connection.
Error in creating/modifying plate part
Error when deleting a relationship from this object
Error when deleting this object.
Error while creating new child physical connection due to split operation
Error while updating Split Point
Failed on dynamic memory allocation - out of memory
Failed retrieving the SDCut Active Entity from the assoc graph
Failed to add an element to the collection of boundaries
Failed to add the profile to the revision manager
Failed to apply cutout to geometry.
Failed to apply end cuts. Check cut type, symbol file and symbol definition.
Failed to bind to Symbol output
Failed to convert the 3x3 matrix to a 4x4 matrix
Failed to convert the contour to a wire body representation
Failed to convert the contour to an attributed wire body
Failed to copy entity
Failed to create a new elements collection
Failed to create a required object
Failed to create an empty collection
Failed to create end cuts or assembly connections, check symbol, stiffened plate, or boundaries
Failed to create enumerator from vector
Failed to create model geometry from topology data
Failed to create struct detail connection utilities
Failed to create surface body utilities
Failed to create the Beam
Failed to create the feature
Failed to create the Plane object
Failed to create the profile part
Failed to create the profile's geometry
Failed to create the stiffener
Failed to create the Struct Detailing Helper object. Ensure that it is properly registered
Failed to deactivate the relation
Failed to determine if the semantic pattern is modified
Failed to enum continuous wires
Failed to enumerate the collection of IJDRelationships
Failed to enumerate the connected ports or their monikers
Failed to enumerate the operators for the specified (bound or split) operation
Failed to extend the profile part’s geometry so that mitering could properly be applied. Therefore, the profile (stiffener or beam) part has not been created or updated.
Failed to get operation in graph
Failed to get profile orientation parameters
Failed to get the geometry associated with the system
Failed to get the IJStructOperation Interface
Failed to get the IJStructOperation Interface
Failed to get the name of the geometry entity
Failed to get topology
Failed to migrate physical connection on leaf ports
Failed to modify the beam
Failed to modify the relation
Failed to modify the Stiffener
Failed to query IJSGOSolidBodyUtilities
Failed to query interface on model body
Failed to query reference wire's interface
Failed to query solid model body
Failed to query the beam orientation's interface
Failed to query the geom solid body interface
Failed to query the profile part interface
Failed to replace seampoint with bounding plane
Failed to resolve moniker name
Failed to retrieve connection or collection of connections
Failed to retrieve the associated plate system for the specified profile system
Failed to retrieve the bound, splitter opening operation
Failed to retrieve the children parts derived from the specified plate system
Failed to retrieve the CLSID
Failed to retrieve the collection of openings on the plate
Failed to retrieve the collection of openings on the plate
Failed to retrieve the count from the IEnumUnknown collection
Failed to retrieve the IJChamfer interface
Failed to retrieve the IJDObject interface
Failed to retrieve the IJStiffener Interface
Failed to retrieve the IJStructGenericContour interface from the cutout operator
Failed to retrieve the landing curve for the profile (Stiffener, beam) being processed.
Failed to retrieve the Molded Conventions of the stiffener's plate
Failed to retrieve the name of the relationship
Failed to retrieve the normal vector of the body at the specified point
Failed to retrieve the object's STRUCT_RESULT_TYPE_XXX flag.
Failed to retrieve the operand from the operation
Failed to retrieve the operand from the operation
Failed to retrieve the operators from the operation
Failed to retrieve the operators from the operation
Failed to retrieve the parent profile system
Failed to retrieve the part's parent. All parts MUST have a parent system
Failed to retrieve the persistent object manager from the Plate/Profile
Failed to retrieve the result from the operation
Failed to retrieve the result from the operation
Failed to retrieve the revision object
Failed to retrieve the stiffener's plate
Failed to retrieve the symbol definition
Failed to retrieve the symbol representation
Failed to retrieve the transformation matrix from the symbol
Failed to retrieve the type of plate
Failed to retrieve the values (IJDArguments) from the values arg (IJDValuesArg)
Failed to retrieved representation name from Symbol
Failed to retrieved representation name from Symbol
Failed to set the display style
Failed to set the geometry state's result type
Failed to set the graphics
Failed to set the IJControl Flags - Ambiguous solutions will not be invisible
Failed to set the IJStructGeometry
Failed to set the operand for this operation
Failed to set the projection distance in the collar's persistent data
Failed to set the semantic pattern
Failed to set xid on lateral edges
Failed to shallow copy
Failed to store the result entity
Failed to transform array into a safe array
Failed to transform the plane
Failed to trim mounting face
Failed to trim the profile part
Failed to update the geometry of physical connection
Failed to update the relations of this operation
Failed to update twist angles
Failed while comparing lists of boundaries
Geometry of the edge treatment is not calculated
IJRevision-Update failed. Is the Schema updated? (Structural Detailing)
Invalid argument
Invalid input argument
Invalid input argument
Lapped To Part is not a Plate or Profiles system
Length of the edge treatment is not calculated.
Mismatched IJRevision->BatchReentry() calls
Naming solver failed to take responsibility for the newly created object
Negative Extrusion
No symbol defined
No symbol definition
No symbol name
No symbol outputs
No symbol representation
No symbol representations
Object Does not Support Required Interface
Object is out of date
Object Not In Working Status.
One of the arguments of this operation was of the incorrect type
One or more empty arguments passed in
Penetrating Direction
Plane
Positive Extrusion
Reset method failed
Return parameter is an invalid pointer
Split point does not intersect with physical connection
Split point with offset value does not intersect selected physical connection
Successfully retrieved the collar's output, but it does not support a required interface
Symbol output is not a plane
The bracket object does not support a required interface
The collar entity does not support IJDSymbol.
The collar symbol's definition was expecting one type of parameter (e.g.string) but the input parameter...
The collar's Symbol failed to retrieve its output. (IJDSymbol->BindToOutput failed)
The collar's symbol has not completed its initialization. Defer this call until later in the collar's lifetime
The collar’s outline geometry is bad. Check the Symbol compute.
The connection between the Plate System being detailed and one of its boundaries is missing. Detailed parts cannot be generated on this system.
The contour is not planar
The current collar has not been properly initialized. Check it's aggregated symbol
The current minimum projection distance is greater than the current maximum projection distance. Ensure that the minimum is less than or equal to the maximum
The input body is not a surface. This method works only with surfaces
The input edge ports are not intersecting. Check the inputs.
The input reference IID (riid) is invalid. Cannot be IID_NULL
The input to this operation does not support a required interface (must be a collar part)
The moniker cannot be NULL
The naming solver failed to take responsibility for this object's name - reverting to default name
The number of limits retrieved from the data store is invalid. Valid values are 0, 1 or 2
The number of supports retrieved from the data store is invalid. Valid values are 2 or 3
The object does not implement a required interface (Structural Detailing)
The object on the origin side of the CollarDefiningData relationship could not be retrieved. Is this relationship established in the meta data?
The operation selected is not applicable to this type of feature
The plate part cannot be trimmed with the available boundaries
The profile needs to be split at the split knuckle before the detailing can be processed.
The Profile Part Generation Semantic is intended only for system derived profile parts
The Profile Part unexpectedly failed to support one or more required interfaces
The reference object, used to place the edge feature by offset, does not intersect with the edge
The return parameter points to null
The Semantic unexpectedly failed to support one or more required interfaces
The specified projection distance is less than the collar's plate thickness.
The stiffener currently being computed is scheduled for deletion. Once all delete propagation flags are followed, this stiffener should no longer exist.
The supplied operation input is not a collar part. The input used to create a collar part is the collar part itself (self-input).
The unit type of the input (e.g. Distance) is different than that required by the symbol definition
There is no input for this operation
This method currently only supports plate parts and profile parts. Check your inputs
This operation expects only one input. Check IJGeometryGeneration->SetParents
This Treatment has invalid boundaries
This Treatment overlaps with other treatment
Too many outputs. Generating a profile part should have exactly one output
Tried to set a value other than 0, 1 or 2
Tried to set a value other than 2 or 3
Unidentified Failure
Unknown error
Unknown Error
You attempted to set a required symbol input using an empty value
Structural Manufacturing To Do List Messages
BeforeFeature length is smaller than AfterFeature length
Detail Profile Part missing Web/Flange Cut at end(s)
Error creating frame remarking lines.
Error creating internal remarking lines.
Error creating Manufacturing pins.
Error creating Naval Arch (tangent) remarking lines.
Error creating placeholder for projected remarking lines.
Error creating projected remarking lines.
Error defining contour lines of plate/assembly.
Error generating Supported and Remarking Surfaces.
Error in adding bevel data to an edge
Error in CheckMfgMarkingInputs.
Error in CoCreate.
Error in CreateBasePlane.
Error in CreateControlLine
Error in CreateMfgMarkingLine method.
Error in CreateTemplates.
Error in deleting outdated geometries
Error in ExecuteRules
Error in FlushOutputCollection
Error in get_ProgId
Error in GetMfgMarkingAmbiguity.
Error in GetRule
Error in GetRulesQuery
Error in Getting MfgTempalteSet Output Object.
Error in Getting PlatePart.
Error in Getting Shrinkage Active Entity.
Error in Getting Template ActiveEntity Object.
Error in Getting TemplateSet Object.
Error in Getting TemplateSetting Object.
Error in put_MfgMarkingClientRespons.
Error in QueryInterface.
Error in sub Helper function call
Error in the master projection and pin creation routine.
Error in Unfold sub function
Error retrieving added pins from Pin Jig Active Entity.
Error retrieving Jig output objects from Pin Jig Active Entity.
Error Retrieving OffsetPort Geometry.
Error retrieving passive entities from Pin Jig Active Entity.
Error retrieving Pin Jig Active Entity.
Error Retrieving PlateNormal.
Error Retrieving Ports.
Error Retrieving PrimaryDirection Unit Vector.
Error Retrieving SecondaryDirection Unit Vector.
Error Retrieving Shrinkage Inputs.
Error retrieving Supported plates from Pin Jig Active Entity.
Error updating this object
Failed to Store Inputs with MSM.
Invalid Inputs
Invalid primary axis.
Invalid secondary axis.
Multiple Warnings occurred. Please check error log.
Object out-of-date because of copy similar
Object out-of-date because of split migration
Object out-of-date because of synchronization
Pin Jig maybe missing some geometry (Remarking line/Mfg Pin). See error log for details.
Problem in deleting outdated geometrices
Problem in intializing the creation semantic
Problem occurred during the unfold
Problem occurred in Assembly Margin Name Rule.
Problem occurred in common part name rule.
Problem occurred in End Connection marking rule.
Problem occurred in Fabrication Margin Name Rule.
Problem occurred in Lap Connection marking rule.
Problem occurred in Location Mark rule.
Problem occurred in Marking Folder Name Rule.
Problem occurred in Marking Name Rule.
Problem occurred in Mfg Tab name rule.
Problem occurred in plate feature label marking rule.
Problem occurred in Profile Name rule.
Problem occurred in Profile Process Custom Attribute Rule.
Problem occurred in Shrinkage Name Rule.
Problem occurred in Template Name Rule.
Problem occurred when applying a mfg definition
Template Service routine Create Base Plane: Failed to Create Base Plane.
Template Service routine Create Base Plane: Failed to get edges from Plate Part.
Template Service routine Create Base Plane: Failed to get Surface from Plate Part.
Template Service routine Create Base Plane: Failed to intersect Surface with Plane.
Template Service routine Create BaseControl Line: Failed to create Base Control Line.
Template Service routine Create BaseControl Line: Failed to get edges from Plate Part.
Template Service routine Create BaseControl Line: Failed to get Surface from Plate Part.
Template Service routine Create BaseControl Line: Failed to intersect Surface with Plane.
Template Service routine Template Contours: Failed to Apply Extension to Template Location Mark Lines.
Template Service routine Template Contours: Failed to Apply Margin.
Template Service routine Template Contours: Failed to Apply Offset.
Template Service routine Template Contours: Failed to Create Bottom Lines.
Template Service routine Template Contours: Failed to Create Template Contours.
Template Service routine Template Contours: Failed to define Template Plane from corner points.
Template Service routine Template Contours: Failed to get edges from Plate Part.
Template Service routine Template Contours: Failed to get Intersection between curves.
Template Service routine Template Contours: Failed to intersect curve with Plane.
Template Service routine Template Contours: Failed to intersect Surface with Plane.
Template Service routine Template Contours: Failed to project Complex String to Surface.
Template Service routine Validate Process Settings: If Orientation is AlongFrame, PositionEven should be NotUsed.
Template Service routine Validate Process Settings: If Orientation is AlongFrame, PositionFrames should be Along Frame.
Template Service routine Validate Process Settings: If PositionFrame is chosen, PositionEven should be NotUsed.
Template Service routine Validate Process Settings: If Type is Frame, Direction should be Transversal.
Template Service routine Validate Process Settings: If Type is Perpendicular, Orientation should be Perpendicular.
This object is out of date.
Unknown error.
Unknown error.
Web frame check lines marking rule failed to create continuous curve. Use Marking Line command to create manually.
Structure To Do List Messages
A property is set to an unsupported value.
A split connection already exists at the selected location.
An input is in error
Another assembly connection already exists at the member end. This connection has been disabled and should be deleted.
Assembly connection has been defined with an unsupported section type.
Axis collinear frame connections require the member systems to be collinear. Either modify one of the member systems to make it collinear with the other member or delete the axis collinear frame connection.
Axis-along frame connection is invalid because the previous connection was not removed. Change connection to unsupported and the re-select the supporting member.
Axis-along frame connection is missing the supporting member information. Change connection to unsupported and then re-select the supporting member.
Axis-along frame connection is related to something other than a supporting member system. Change connection to unsupported and then re-select the supporting member.
Axis-along frame connection is using the same member system for both the supporting and supported member. Change connection to unsupported and then re-select the supporting member.
Axis-along frame connection was re-verified and found to be invalid. Change connection to unsupported and then re-select the supporting member.
Axis-along frame connection's supported member has invalid point-on relationship with another member. Change connection to unsupported and then re-select the supporting member.
Axis-collinear frame connection has an invalid end port relationship. Change connection to unsupported and then re-select the supporting member.
Axis-collinear frame connection is invalid because the previous connection was not removed. Change connection to unsupported and the re-select the supporting member.
Axis-collinear frame connection is missing a required input. Change connection to unsupported and then re-select the supporting member.
Axis-collinear frame connection is missing the supporting member information. Change connection to unsupported and then re-select the supporting member.
Axis-collinear frame connection is related to something other than a member system. Change connection to unsupported and then re-select the supporting member.
Axis-collinear frame connection is related to something other than a supporting member system. Change connection to unsupported and then re-select the supporting member.
Axis-collinear frame connection is using the same member system for both the supporting and supported member. Change connection to unsupported and then re-select the supporting member.
Axis-collinear frame connection requires the same permission group for both member systems. Edit one of the permission groups to match the other.
Axis-collinear frame connection was re-verified and found to be invalid. Change connection to unsupported and then re-select the supporting member.
Axis-end frame connection cannot find supported member end. Change connection to unsupported and then re-select the supporting member.
Axis-end frame connection has an invalid end port relationship. Change connection to unsupported and then re-select the supporting member.
Axis-end frame connection is invalid because the previous connection was not removed. Change connection to unsupported and the re-select the supporting member.
Axis-end frame connection is missing a required input. Change connection to unsupported and then re-select the supporting member.
Axis-end frame connection is missing the supporting member information. Change connection to unsupported and then re-select the supporting member.
Axis-end frame connection is related to an end port that is different from the supporting member end port. Change connection to unsupported and then re-select the supporting member.
Axis-end frame connection is related to something other than a member system. Change connection to unsupported and then re-select the supporting member.
Axis-end frame connection is related to something other than a supporting member system. Change connection to unsupported and then re-select the supporting member.
Axis-end frame connection is using the same member system for both the supporting and supported member. Change connection to unsupported and then re-select the supporting member.
Axis-end frame connection relationships are inconsistent. Change connection to unsupported and then re-select the supporting member.
Axis-end frame connection requires the same permission group for both member systems. Edit one of the permission groups to match the other.
Axis-end frame connection was re-verified and found to be invalid. Change connection to unsupported and then re-select the supporting member.
Bad fireproofing definition. The fireproofing definition does not support a required interface.
Bad fireproofing object. No symbol is associated with the selected fireproofing object.
Bad geometry. The selected fireproofing specification and encasement type exceed the available spacing requirements for the selected member.
Base plate connection has an invalid number of inputs. Delete and replace.
Brace end is not located near the first supporting member in the vertical corner brace frame connection. Change the connection to unsupported and then re-select the supporting members.
Brace end is not located near the second supporting member in the vertical corner brace frame connection. Change the connection to unsupported and then re-select the supporting members.
Brace is not point-on related to a split connection or an end-joint of a member. Change connection to unsupported and then re-select the intersection.
Can is missing one of the required inputs. Delete and replace
Can overlaps other can or other split
Cannot apply bound operation.
Cannot apply cutout(s)
Cannot apply extrusion on contour
Cannot compute weight and CG
Cannot create bound connections
Cannot create cutout
Cannot find intersection
Cannot modify a read-only object
Cannot project bounding line on supporting plane
Cannot project point on geometry
Cannot update graphic data cache
Cannot update one port
Cannot use this frame connection as Obj1 to SetRelatedObject. See To Do List messages in the Troubleshooting Guide for more information.
Cannot use this frame connection as Obj2 to SetRelatedObject. See To Do List messages in the Troubleshooting Guide for more information.
Cardinal point set for the designed member is unsupported.
Centerline frame connection is invalid because the previous connection was not removed. Change connection to unsupported and then re-select the supporting member.
Centerline frame connection is missing a required input. Change connection to unsupported and then re-select the supporting member.
Centerline frame connection is missing the supporting member information. Change connection to unsupported and then re-select the supporting member.
Centerline frame connection is related to something other than a supported member. Change connection to unsupported and then re-select the supporting member.
Centerline frame connection is related to something other than a supporting member. Change connection to unsupported and then re-select the supporting member.
Centerline frame connection is using the same member system for both the supporting and supported member. Change connection to unsupported and then re-select the supporting member.
Centerline frame connection was reverified and found to be invalid. Change connection to unsupported and then...
Centerline frame connection's supported member has invalid point-on relationship with another member. Change connection to unsupported and then re-select the supporting member.
Chevron frame connection is invalid because the previous connection was not removed. Change connection to unsupported and the re-select the supporting member.
Chevron frame connection is missing a required input. Change connection to unsupported and then re-select the supporting member.
Chevron frame connection is missing the supporting member information. Change connection to unsupported and then re-select the supporting member.
Chevron frame connection is related to something other than a brace member system. Change connection to unsupported and then re-select the supporting member.
Chevron frame connection is related to something other than a supporting member. Change connection to unsupported and then re-select the supporting member.
Chevron frame connection is using the same member system for both the supporting and supported member. Change connection to unsupported and then re-select the supporting member.
Chevron frame connection's supported member has invalid point on relationship with another member. Change connection to unsupported and then re-select the supporting member.
Combined footings require a minimum of two supported members.
Combined footings require all supported members to have the same bottom-of-steel elevation.
Compatible Encasement not found. The software could not find a suitable fireproofing object in the catalog for the selected member.
Compute of the Gap frame connection failed.
Compute of the Gap frame connection failed.
Cope is no longer valid for current member/surface physical orientation
Corner gusset connection has invalid inputs. Delete and replace.
Custom ladder symbol code is failing to generate the ladder geometry.
Custom stair symbol code is failing to generate the stair geometry.
Cutout not in spatial index
Cutout outside geometry range
Defined contour is not planar
Defined contour is open
Depth of designed member is too shallow to accommodate the thickened flange plates.
Designed member cannot be computed with the given values of occurrence attributes.
Designed member is missing some required inputs.
Edit opening and redefine orientation
Equipment foundation ports are too close together for the selected foundation.
Error occurred while computing sketched opening shape
Error while computing sketched boundary.
Errors evaluating the sweep operation
Failed to access the plate dimension catalog data.
Failed to get path ComplexString from Sketch 3D
Fireproofing object failure. The software could not create a required relationship between the fireproofing and the selected object (input helper failed). (Structure)
Fitted connection has an invalid number of inputs. Delete and replace.
Fitted connection has invalid inputs. Delete and replace.
Flange plate width less than or equal to zero.
Flange width of the designed member is too narrow to accommodate the thickened web plate and specified web offset.
Flush frame connection is invalid because the previous connection was not removed. Change connection to unsupported...
Flush frame connection is missing a required input. Change connection to unsupported and then re-select the supporting member.
Flush frame connection is missing the supported member system. Change connection to unsupported and then re-select the supporting member.
Flush frame connection is missing the supporting member system. Change connection to unsupported and then re-select the supporting member.
Flush frame connection is related to something other than a supporting member system. Change connection to unsupported and then re-select the supporting member.
Flush frame connection is using the same member system for both the supporting and supported member. Change connection to...
Flush frame connection was re-verified and found to be invalid. Change connection to unsupported and then re-select the supporting member.
Flush frame connection's supported member has invalid point-on relation to another member. Change connection to...
Footing cannot be placed using selected inputs. Delete and replace.
Footing requires a supporting plane that is missing.
Footing support plane is above the bottom of the supported member. Footing pier height is an invalid negative value.
Footing support plane is above the bottom of the supported member. Footing slab height is an invalid negative value.
Footing support plane is not valid for some supported members. Footing pier height is an invalid negative value.
Footing support plane is not valid. Software cannot compute the pier height. Delete and replace footing.
Footing support plane is not valid. Software cannot compute the slab height. Delete and replace footing.
Footing symbol does not support requested number of Supported Members
For the Gap frame connection to work correctly, all participating members must be placed with cardinal point 5.
Foundation width or length is less than zero.
Frame connection is invalid because the previous connection was not removed. Change connection to...
Gap frame connection is missing a required input.
General surface connection has an invalid number of inputs. Delete and replace.
General surface connection has invalid inputs. Delete and replace.
Gusset plate connection has an invalid number of inputs. Delete and replace.
Gusset plate connection has invalid inputs. Delete and replace.
Handrail path segment is not a line or arc. Edit handrail path and redefine all path segments to be either a line or an arc.
Incompatible Encasement. The fireproofing encasement does not match the specification.
Invalid attribute value set on an occurrence attribute of designed member.
Invalid Handrail Path. Handrail cannot be recomputed.
Invalid input count. An unexpected number of input objects were found in the fireproofing symbol.
Invalid intersection
Invalid number of inputs.
Invalid operation
Invalid point as plane parent
Invalid setback parameters. The setback distance you entered will not work.
Invalid thickness
Invalid trim operation applied to the end of the member
Invalid type of object. Fireproofing cannot be placed on the selected object.
Ladder failed to compute
Ladder is missing the bottom surface reference object.
Ladder is missing the side reference edge object.
Ladder is missing the top edge reference object. Edit ladder and select a new top edge. The ladder will not respond to any edits until a new top edge is selected.
Length is too short to properly construct the designed member.
Line and plane are orthogonal
Member cross section symbol is missing width or depth properties. Edit member and select a valid cross section for the member. Refer to...
Member failed to update or create the member part ASIC solid. See To Do List messages in the Troubleshooting Guide for more information.
Member has an invalid trim surface relation. See To Do List messages in the Troubleshooting Guide for more information.
Member has surface connection to an invalid surface
Member is missing the cross section definition. Edit the member and select a new cross section.
Member is missing its cross-section. The member will not rspond to some property edits. Edit the member, and select a new cross-section.
Member is missing the input part generator. See To Do List messages in the Troubleshooting Guide for more information.
Member is missing the input solid geometry. See To Do List messages in the Troubleshooting Guide for more information.
Member is missing the material definition. Edit the member and select a new material.
Member is missing the member part axis. See To Do List messages in the Troubleshooting Guide for more information.
Member logical axis has zero length.
Member physical axis has zero length.
Member Seam Angle missing but catalog cross section has Seam is true
Member Seam Angle set but catalog cross section has Seam is missing or false
Members are not constrained by the same joint.
Members are not in the same plane.
Missing fireproofing object. The specified fireproofing object is not in the catalog.
Mitred connection has invalid inputs. Delete and replace.
No intersection between boundaries
No intersection between bounding plane and supporting plane
Not enough boundaries for the contour (need at least 3)
Not enough points to generate the plane (need at least 3 not aligned points)
Object that identifies the split location is not a required linear object. Delete the connection and replace.
Octagonal Grout is not supported
Offset less than zero; ignoring the offset and using a value of zero.
One or more specified parameters are invalid. Check the error log for more information.
One or more specified parameters are invalid. Check the error log for more information. Edit the can and specify valid inputs.
Output contour is read only
Output is read only
Output plane is read only
Parent line is lacking
Parent port does not have common geometry
Permission denied. You do not have permission to modify the selected member part.
Pier height is invalid. Check the bottom plane and the defined grout thickness.
Plate cannot be positioned properly as the Member's CP line does not intersect with the supporting surface.
Plate cannot be positioned properly on the supporting member. Reducing the supported member section may fix this problem
Plate thicknesses for the indicated material/grade were not found.
Point is outside curve
Seated frame connection is invalid because the previous connection was not removed. Change connection to unsupported and the re-select the supporting member.
Seated frame connection is missing a required input. Change connection to unsupported and then re-select the supporting member.
Seated frame connection is missing the supported member system. Change connection to unsupported and then re-select the supporting member.
Seated frame connection is missing the supporting member system. Change connection to unsupported and then re-select the supporting member.
Seated frame connection is related to something other than a supporting member system. Change connection to unsupported and then re-select the supporting member.
Seated frame connection is using the same member system for both the supporting and supported member. Change connection to unsupported and then re-select the supporting member.
Seated frame connection was re-verified and found to be invalid. Change connection to unsupported and then re-select the supporting member.
Seated frame connection's supported member has invalid point-on relation to another member. Change connection to unsupported and then re-select the supporting member.
Self intersecting sweep path
Sketch curve lost an input which was deleted
Splice connections do not support <Section Type>
Splice connections do not support members that are not collinear and end-connected.
Splice connections do not support members with different cross sections shapes.
Splice connections do not support members with different rotations.
Split connection encountered an unexpected error. See To Do List messages in the Troubleshooting Guide for more information.
Split connection has invalid inputs. Delete and replace.
Split connection is missing a required input. Delete the connection and replace.
Split connection is missing the member system to split. Delete the connection and replace.
Split connection is missing the object that identifies the split location. Delete the connection and replace.
Split connection is using the same member for both the member to split and to define the split location. Delete the connection and replace.
Split is missing on the replaced member part. Delete the split connection and replace.
Stair failed to compute
Stair is missing the bottom surface reference object. Edit stair and select a new bottom reference.
Stair is missing the side reference edge object.
Stair is missing the top edge reference object. Edit stair and select a new top edge.
Struct Layer Type not found in catalog
Support plane is lacking
Supported and supporting members are almost parallel.
Supported member end is too far away from the supporting member.
Supported member ends share single end joint. Change connection to unsupported and then re-select the supporting member.
Supported member is not at the end of the supporting member as required by the axis-collinear frame connection.
Supported member not defined. Change connection to unsupported and then re-select the supporting member.
Supporting member end is too far away from the supported member.
Supporting plane has been removed. Warning Only. Select a new supporting plane.
Supporting plane has been removed. Warning Only. Select a new supporting plane.
Supporting Port unable to get related MemberSystem connection.
Surface frame connection is missing a required input. Change connection to unsupported and then re-select the supporting member.
Surface frame connection is missing the member system. Change connection to unsupported and then re-select the supporting member.
Surface frame connection is missing the surface. Change connection to unsupported and then re-select the supporting member.
Surface frame connection is related to something other than a valid surface. Change connection to unsupported and then re-select the supporting member.
Surface frame connection was re-verified and found to be invalid. Change connection to unsupported and then re-select the supporting member.
Surface trim has invalid inputs. Delete and replace.
Surface trim is no longer valid for current member/surface physical orientation.
Sweep path not planar
Sym file of some cross sections is not accessible
The associated equipment was modified and has caused the foundation to have no height.
The BUCAN definition is not in the catalog.
The equipment foundation is not associated with equipment.
The equipment foundation was modified and has caused the foundation to have no diameter.
The member system that the footing was supporting is missing. Delete footing or assign footing to a new member system.
The member system to split and the object selected to define the split location do not intersect.
The property Begin Treatment Type is set to an unsupported value. Select a valid entry for this property.
The property Boundaries Projection Direction is set to an unsupported value. Select a valid entry for this property.
The property Boundaries Slope Direction is set to an unsupported value. Select a valid entry for this property.
The property Boundary Offset Reference is set to an unsupported value. Select a valid entry for this property.
The property Connection Type for Side Mount is set to an unsupported value. Select a valid entry for this property.
The property Continuity is set to an unsupported value. Select a valid entry for this property.
The property Coordinate System is set to an unsupported value. Select a valid entry for this property.
The property Cope Radius Type is set to an unsupported value. Select a valid entry for this property.
The property Corner Type is set to an unsupported value. Select a valid entry for this property.
The property Cross Section Symbol is set to an unsupported value. Select a valid entry for this property.
The property Edge is set to an unsupported value. Select a valid entry for this property.
The property End Treatment Type is set to an unsupported value. Select a valid entry for this property.
The property Face Position is set to an unsupported value. Select a valid entry for this property.
The property Fastener Type is set to an unsupported value. Select a valid entry for this property.
The property Flange Plate Category is set to an unsupported value. Select a valid entry for this property.
The property Flange Plate Type is set to an unsupported value. Select a valid entry for this property.
The property Grout Orientation is set to an unsupported value. Select a valid entry for this property.
The property Grout Shape is set to an unsupported value. Select a valid entry for this property.
The property Grout Sizing Rule is set to an unsupported value. Select a valid entry for this property.
The property Handrail Orientation is set to an unsupported value. Select a valid entry for this property.
The property Handrail Section Cardinal Point is set to an unsupported value. Select a valid entry for this property.
The property Hoop Opening is set to an unsupported value. Select a valid entry for this property.
The property Horizontal Offset is set to an unsupported value. Select a valid entry for this property.
The property Horizontal Path Offset is set to an unsupported value. Select a valid entry for this property.
The property Justification is set to an unsupported value. Select a valid entry for this property.
The property Main Direction Reference is set to an unsupported value. Select a valid entry for this property.
The property Manufacturing Process is set to an unsupported value. Select a valid entry for this property.
The property Midrail Section Cardinal Point is set to an unsupported value. Select a valid entry for this property.
The property Offset Direction is set to an unsupported value. Select a valid entry for this property.
The property Pad Type is set to an unsupported value. Select a valid entry for this property.
The property Pier Orientation is set to an unsupported value. Select a valid entry for this property.
The property Pier Shape is set to an unsupported value. Select a valid entry for this property.
The property Pier Sizing Rule is set to an unsupported value. Select a valid entry for this property.
The property Plate Category is set to an unsupported value. Select a valid entry for this property.
The property Plate Type is set to an unsupported value. Select a valid entry for this property.
The property Port Face Position is set to an unsupported value. Select a valid entry for this property.
The property Position is set to an unsupported value. Select a valid entry for this property.
The property Post Connection Type is set to an unsupported value. Select a valid entry for this property.
The property Post Section Cardinal Point is set to an unsupported value. Select a valid entry for this property.
The property Priority is set to an unsupported value. Select a valid entry for this property.
The property Reference Direction is set to an unsupported value. Select a valid entry for this property.
The property Side Frame Section Cardinal Point is set to an unsupported value. Select a valid entry for this property.
The property Side is set to an unsupported value. Select a valid entry for this property.
The property Sizing Rule is set to an unsupported value. Select a valid entry for this property.
The property Slab Orientation is set to an unsupported value. Select a valid entry for this property.
The property Slab Shape is set to an unsupported value. Select a valid entry for this property.
The property Slab Sizing Rule is set to an unsupported value. Select a valid entry for this property.
The property Splice Width is set to an unsupported value. Select a valid entry for this property.
The property Step Section Cardinal Point is set to an unsupported value. Select a valid entry for this property.
The property Supporting CP is set to an unsupported value. Select a valid entry for this property.
The property Symmetry is set to an unsupported value. Select a valid entry for this property.
The property Thickening Direction is set to an unsupported value. Select a valid entry for this property.
The property Toe Plate Section Cardinal Point is set to an unsupported value. Select a valid entry for this property.
The property Toprail Section Cardinal Point is set to an unsupported value. Select a valid entry for this property.
The property Web Plate Category is set to an unsupported value. Select a valid entry for this property.
The property Web Plate Position is set to an unsupported value. Select a valid entry for this property.
The property Web Plate Type is set to an unsupported value. Select a valid entry for this property.
The property Web Radius Type is set to an unsupported value. Select a valid entry for this property.
The property Work Point is set to an unsupported value. Select a valid entry for this property.
The selected member does not have a BUTUBE definition.
The split connection definition is not in the catalog.
The split point is not within the member system to be split.
This element has read-only access.
Two or more of the participating members are parallel.
Unable to open the 2D document.
Unexpected Error. Fireproofing object failed.
Unknown error. Delete and replace.
Unknown object type from port.get_ILC.
Unsupported frame connection is linked to more than one member system. Delete this frame connection.
Unsupported frame connection is linked to something other than a member system. Delete this frame connection.
Unsupported frame connection is missing its parent member system information. Delete this frame connection.
Unsupported frame connection is missing required data. Delete this frame connection.
Vertical corner brace frame connection cannot identify the end of the brace to connect. Change connection to unsupported and then re-select the supporting members.
Vertical corner brace frame connection has invalid relationships between member systems. Change connection to unsupported and then re-select the intersection.
Vertical corner brace frame connection is invalid because the previous connection was not removed. Change connection to unsupported and the re-select the supporting members.
Vertical corner brace frame connection is missing a required input. Change connection to unsupported and then re-select the supporting members.
Vertical corner brace frame connection is missing a supporting member system. Change connection to unsupported and then re-select the supporting members.
Vertical corner brace frame connection is missing one of the two require supporting member systems. Change connection to unsupported and then re-select the supporting member.
Vertical corner brace frame connection is missing the brace member system. Change connection to unsupported and then re-select the supporting members.
Vertical corner brace frame connection is missing the first supporting member information. Change connection to unsupported and then re-select the supporting members.
Vertical corner brace frame connection is missing the second supporting member information. Change connection to unsupported and then re-select the supporting members.
Vertical corner brace frame connection is related to something other than the first supporting member system. Change connection to unsupported and then re-select the supporting member.
Vertical corner brace frame connection is related to something other than the second supporting member system. Change connection to unsupported and then re-select the supporting members.
Vertical corner brace frame connection is using the brace member incorrectly as a supporting member. Change connection to unsupported and then re-select the supporting members.
Vertical corner brace frame connection is using the same member system for both supporting members. The two supporting members must be different members....
Vertical corner brace frame connection requires that the brace have a point on relationship to the intersection of the supporting members. Change connection to...
Wall is missing a boundary. Select a valid boundary.
Width of Box-shape is too narrow to accommodate the thickened web plates and specified web offsets.
Width of designed is too narrow to accommodate the thickened web plates.
Width of designed member cannot be less than the thickness of the web plate.
Using Smart 3D and Smart 3Dx Together
When double-clicking a session file created with Smart 3Dx to start Smart 3D, the Workspace Explorer does not respond
Internationalization
Legal Information
Customer Support
Anti-Piracy Statement
Copyright Notice
Glossary
abaft
abstract part
access holes
accommodation
accommodation ladder
ACI
Active Template Library (ATL)
actuator
aft
after body
aftermost
airway
AISC (American Institute of Steel Construction)
AISI
alternative text (AText)
ampacity
analysis
analysis model
analytical member
anchor bolts
angle
anisotropic material
annotations
applet
application
application component
approval state
arc element
area
area
arrangement (accommodation)
arrangement (electrical)
arrangement (HVAC)
arrangement (machinery)
arrangement (outfitting)
arrangement (piping)
as-built
as-designed
as-is
assembly
assembly
assembly block
assembly connection (marine)
assembly connection (member)
assembly connection (slab)
assembly information rule
assembly margin
assembly process
associativity
attribute
auto-nesting
axis
back shell
bar
basic design
batch extraction
bay
BCSA (British Constructional Steelwork Association)
beam
beam part
beam system
bearing plate
belt
belt path
belt region
bending
bent
bill of material (BOM)
block
block decomposition
block division
bolt part
boundary condition
brace
bracket plate system
branch point
build strategy
built ships
built-up member
bulkload
bus
busbar
cabin plan
cabinet
cable
cable core binder
cable filler
cable hanger
cable jacket
cable marker
cable port
cable run
cable schedule
cable shielding
cable terminal
cableway
cableway load
callout
camber
cans
cantilever
catalog
Catalog database
Catalog task
ceiling
center flange
chain
chamfer
change history
change management
change propagation
channel
channel (electrical)
chord
circuit
circuit breaker
circular bar
circular tube
CISC (Canadian Institute of Steel Construction)
claim
class
class rule check
Class Rules
classification folder
clip angle
coaming
codelist
collar part
column
combined support
commodity code
commodity item
common part
common part group
compartmentation
component
component
compound document
concentrated force
concentrated moment
concurrent access
condition rule
conductor
conduit (flexible)
conduit (rigid)
conduit body
conduit fitting
conduit nozzle
conduit seal
consolidated tasks
constraint
constraints
construction profile
contract
control point
control point (drawing)
coordinate
coordinate system
cope
corrugation
cover plate
critical flow
cross section
cut hole
cut pipe report
cutback
cutting plane
d/D
damage records
data interchange
database
database backup
database break and recovery
database copy
database management
database monitor record
date or time last revised
degree
degree of freedom
de-rating factor
design alternative
design approval log
design data auto input
design documents
design object
design progress check
design review
design service
design solid
design standard
designed equipment
designed member
designed support
detail
detail envelope
detail schedule
detail sketch
detail view
diagonals
diagram (2-D)
dimension rule
distributed force
distributed moment
distributed systems
distribution connection
distribution systems
division
documentation
double line
Draw toolbar
drawing
drawing frame
drawing tool
drawing view
drawing view style
drawing volume
driftpin
duct bank
easting
edge
edge distance
edge reinforcement axis
edge reinforcement boundary
electric
electromagnetic interference (EMI)
element
elevation
elevation (grids)
elevation plane
enclosure
end releases
engineering drawing
equipment
equipment catalog
equipment modeler
equipment trim drawing
erection clearance
erection diagrams
erection network
exit elevation
export
external appendages
fabricate
fabrication plans
face
face plate
face-to-face
facilities
fair
fasteners
feature
feeder
fence
field adjustment
fill calculations
fill efficiency
fill factor
finite element
fire integrity
fitting
fitting (hole management)
flange
flat face
flavor
flexure
flow rate
flow time
fluid flow analysis
focus of rotation
footing
footprint
foundation
foundation or masonry plans
frame
frame connection
framing plan
free edge
Fu
Fu
full penetration weld
function points
functional block diagram
furnishings
Fy
gap element
gasket
general plans
generic specific
girder
girt
girth
grade
graphic rule
graphic view
grid
grid set
ground
GUIDs
gusset plate
handrail
handwheel
hanger connection
head loss
header
HITS report
hole feature
hole fitting
hole trace
hook element
host location
host server
hull
hull applicability versioning
hull form generation development
hull structure design
HVAC
HVAC analysis
hydrostatic test
impedance
implied piping component
initial design
initial structural plan
inline
installation (electrical)
installation (joiner)
installation (machinery)
installation (outfitting)
installation (piping)
installation (ventilation)
instantiation
insulation
insulation level
interactive extraction
interference checking
internal structure
invert elevation
I-Section
ISOGEN
isometric
isometric drawing
isometric drawing style
isotropic material
item
jacket
jigs and fixtures
job order
joiner
joist
junction box
kinematics analysis
kips
knee brace
knuckle curve
ksi
label rule
ladder
leg length analysis
lever
library
life cycle database
lifting
line
link
lintel
load (electrical)
load (structure)
load group
location
logical distribution connection
logical member
lug (electrical)
lug (hangers and supports)
lug and eye piece lifting
machinery
macro
maintenance envelope
maintenance parts
maintenance records
manhole (electrical)
manufacturing (electrical)
manufacturing (HVAC)
manufacturing (joiner)
manufacturing (machinery)
manufacturing (outfitting)
manufacturing (piping)
margin
marking and cutting
marking line
master run
material analysis
material list
material properties
mating port
member name
member part
member system
methods
Microsoft Jet Database Engine
migrate
model
move from point
move to point
MTO neutral file
natural surface
network
node
non-aligned
normal vector
northing
nozzle
nozzle standout
NPD (Nominal Piping Diameter)
object
occurrence (of part or equipment)
occurrence property
off-line modification batch
olet
open interface
optical cable
option
options file
orientation vector
origin
origin point
orthogonal
orthographic
orthotropic material
oversized spool
P&ID
package
painting
panel
parallel cable
paralleled cable
parameter
part class
part number
part override
part ports
part selection rule
parts
parts family
parts library
path
path (electrical)
PCF (Piping Component File)
PDS (Plant Design System)
peak flow
penetration spool
permission
physical member
physical occurrence
pile
pin jig
PinPoint
pipe
pipe (Structure)
pipe bend radius
pipe bolt set
pipe end feature
pipe run
pipe sleeve
pipe specification
pipe stress analysis
pipeline
piping
piping system
pitch
planning block
planning joint
plant
Plant Breakdown Structure (PBS)
plant configuration
plate
pneumatic test
port
post tensioning
precast concrete
pre-stressed concrete
pretensioning
primary member
principle of superposition
product
Product Data Management (PDM) System
product model
product structure
production planning
profile knuckle
project
promotion
property
publish
pull box
pulling tension
purlin
query select sets
radial cylinder
radial plane
rafters
raised face
reactance
rebar
rectangular bar
rectangular tube
reel
reference curve
reference data
reference ports
reflect
reinforced concrete plan
repeatability
replication
resistance
resource estimation
retaining wall
revision cloud
rim elevation
route
rule-based joint
run
saddle
sag ties
SAISC (South African Institute of Steel Construction)
satellite location
satellite server
scenario
schedule
schema
schema update utility
scope document
seal weld
seam
secondary member
section
section name
section orientation
section table
service
session
shear stiffness
shear walls
sheetbody
shell structure
shield
ship
shop drawings
side-wall pressure
site
site administrator
site setup
sketch and trace
skewed member
slab
slave run
sleeve
slope
span
specials
specific
specific energy
specific object
specifications
splice (electrical)
splice (structure)
split
spool
standard support
station
steel outfitting
steel reinforced concrete
stem
stern frame
stiffener
stress
stringer
structure analysis
strut
stud
style
support assembly
surfaces
suspended floor
swage
swash bulkhead
switchgear
symbol key (SKEY)
symmetric node
system
tag number
target point
task
task area
terminal block
tilt-up walls
tolerant geometry
toolsets
transition
translate
transverse
transverse frames
trim
trim
trimmed surface
trunk
truss
tumble home
turn
uniform
unit/module modeler
update rule
upgrade
user attributes
valve
version control
vertex
vertical keel
viewer
viewset
voltage drop
water line
watertight door
weather deck
weathertight door
web
weight and CG analysis
welding
windlass
wire
wirebody
wireways
wizard
Work Breakdown Structure (WBS)
work content
work order
working plane
workset
workspace
workspace document
Workspace Explorer
X-section
yield strength
zone